Anvil® 0500173083 FIG 260 Adjustable Clevis Hanger, 3 in Pipe, 1/2 in Rod, 1350 lb Load, Carbon Steel, Black Oxide
27712047
MFG #: 0500173083
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Adjustable
- Series: FIG 260
- Pipe Size: 3
- Rod Size: 1/2
- Load Capacity: 1350
- Material: Carbon Steel
- Finish: Black, Black Oxide
Anvil® Clevis Hanger, Adjustable, Series: FIG 260, 3 in Pipe, 1/2 in Rod, 1350 lb, Carbon Steel, Black Oxide
- Hanger load nut above clevis must be tightened securely to assure proper hanger performanc
- Hanger load nut abov
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varyin
- Vertical adjustment
- Tighten upper nut after adjustment
- Tighten upper nut af
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, th
- Design has yoke on o
- Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis r
- Sizes 5 in and up ha
Hanger load nut above clevis must be tightened securely to assure proper hanger performance
Hanger load nut above clevis must be tightened securely to assure proper hanger performance
Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
Tighten upper nut after adjustment
Tighten upper nut after adjustment
Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane