JET® 320033 Radial Arm, 3 hp, 230/460 VAC, 3 in Swing, 23-5/8 x 17-1/2 x 15 in Table
54334454
MFG #: 320033
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Radial Arm
- Swing: 3
- Spindle Taper: MT-4
- Spindle Travel: 8-21/32
- Spindle Speed: 88 to 1500
- Number of Spindle Speeds: 6
- Spindle to Table Distance: 9-5/8 to 41-3/8
- Spindle to Column Distance: 8-5/8 to 29-1/2
- Table Size: 23-5/8 x 17-1/2 x 15
- Base Dimensions: 49-5/8 x 25-3/16 x 6-1/4
- Column Diameter: 8-1/4
- Horsepower: 3
- Voltage Rating: 230/460
- Amperage Rating: 8.2/4.1
- Dimensions: 64 in L x 32 in W x 85 in H
JET® Floor Drill Press, Radial Arm, 3 in Swing, MT-4 Spindle Taper, 8-21/32 in Spindle Travel, 88 to 1500 rpm Spindle Speed, 6 Spindle Speed, 9-5/8 to 41-3/8 in Spindle to Table Distance, 8-5/8 to 29-1/2 in Spindle to Column Distance, 23-5/8 x 17-1/2 x 15 in Table, 49-5/8 x 25-3/16 x 6-1/4 in Base, 8-1/4 in Column Dia, 3 hp, 230/460 VAC, 8.2/4.1 A, 64 in L x 32 in W x 85 in H
- The power train gears and spline shafts are made of the finest quality, heat treated and g
- The spindle is made of finest case hardened steel, for extra strength and wear
- The spindle is supported by double row taper roller and thrust ball bearings at the nose,
- Build to withstand exceptionally heavy drilling and boring loads to insure maximum accurac
- Arm raising safety device prevents arm from dropping
- Counter balanced mechanism for spindle return
- 6 speeds/3 feed rates make exotic materials easier to drill, bore and tap
- Centralized control center
- Automatic tool ejector
- Independent arm electric clamping system, which locks and unlocks the head and column
- Push button controls are all reduced to 110 VAC
- Electrical circuits are located in the build-in control box at the rear of the arm, this k
- Entire frame is made of Meehanite® and high tensile strength cast iron to handle the heavi
The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel, giving extra strength and smoothness to high torque loads
The spindle is made of finest case hardened steel, for extra strength and wear
The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
Build to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
Arm raising safety device prevents arm from dropping
Counter balanced mechanism for spindle return
6 speeds/3 feed rates make exotic materials easier to drill, bore and tap
Centralized control center
Automatic tool ejector
Independent arm electric clamping system, which locks and unlocks the head and column
Push button controls are all reduced to 110 VAC
Electrical circuits are located in the build-in control box at the rear of the arm, this keeps the controls dust-and-humidity-free while making them easily accessible for maintenance
Entire frame is made of Meehanite® and high tensile strength cast iron to handle the heaviest of jobs