JET® 320038 Radial Arm, 7-1/2 hp, 230/460 VAC, 5 in Swing, 27-7/8 x 19-5/8 x 15-3/4 in Table
54334457
MFG #: 320038
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Radial Arm
- Swing: 5
- Spindle Taper: MT-5
- Spindle Travel: 14-9/16
- Spindle Speed: 40 to 1920
- Number of Spindle Speeds: 12
- Spindle to Table Distance: 35
- Spindle to Column Distance: 13-3/8 to 62-1/4
- Table Size: 27-7/8 x 19-5/8 x 15-3/4
- Base Dimensions: 97-5/8 x 41-11/32 x 8-1/4
- Column Diameter: 17
- Horsepower: 7-1/2
- Voltage Rating: 230/460
- Amperage Rating: 12/6
- Dimensions: 110 in L x 57 in W x 115 in H
JET® Floor Drill Press, Radial Arm, 5 in Swing, MT-5 Spindle Taper, 14-9/16 in Spindle Travel, 40 to 1920 rpm Spindle Speed, 12 Spindle Speed, 35 in Spindle to Table Distance, 13-3/8 to 62-1/4 in Spindle to Column Distance, 27-7/8 x 19-5/8 x 15-3/4 in Table, 97-5/8 x 41-11/32 x 8-1/4 in Base, 17 in Column Dia, 7-1/2 hp, 230/460 VAC, 12/6 A, 110 in L x 57 in W x 115 in H
- The power train gears and spline shafts are made of the finest quality, heat treated and g
- The spindle is made of finest case hardened steel, for extra strength and wear
- The spindle is supported by double row taper roller and thrust ball bearings at the nose,
- The spindle is built to withstand exceptionally heavy drilling and boring loads and to ins
- Push button controls are all reduced to 110 V
- Electrical circuits are located in the built-in control box at the rear of the arm- this k
- Entire frame is made of Meehanite® and high tensile strength cast iron to handle the heavi
- Arm raising safety device prevents arm from dropping
- Counter balanced mechanism for spindle return
- 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
- Centralized control center
- Automatic tool ejector
- Hydraulic head and column clamping
- 5 in boring capacity stee
The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel, giving extra strength and smoothness to high torque loads
The spindle is made of finest case hardened steel, for extra strength and wear
The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
Push button controls are all reduced to 110 V
Electrical circuits are located in the built-in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance
Entire frame is made of Meehanite® and high tensile strength cast iron to handle the heaviest of jobs
Arm raising safety device prevents arm from dropping
Counter balanced mechanism for spindle return
12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
Centralized control center
Automatic tool ejector
Hydraulic head and column clamping
5 in boring capacity stee