JET® 354169 Belt Drive, 3/4 hp, 115/230 VAC, 5/8 in Chuck, 16-1/2 in Swing, 13-3/4 in Table
12754169
MFG #: 354169
$0.00
/ Each
In Stock
- Type: Belt Drive
- Chuck Size: 5/8
- Swing: 16-1/2
- Spindle Taper: MT-2
- Spindle Travel: 4-3/8
- Spindle Speed: 200 to 3630
- Number of Spindle Speeds: 16
- Spindle to Table Distance: 29-1/8
- Spindle to Column Distance: 8-1/4
- Table Size: 13-3/4
- Table Load Capacity: 19.63
- Table Tilt: 45 deg
- Base Dimensions: 11-1/8 x 19-5/8
- Column Diameter: 3-1/8
- Horsepower: 3/4
- Voltage Rating: 115/230
- Amperage Rating: 9/4.5
- Dimensions: 12-3/4 in L x 23-1/2 in W x 54-1/2 in H
JET® Floor Drill Press, Belt Drive, 5/8 in Chuck, 16-1/2 in Swing, MT-2 Spindle Taper, 4-3/8 in Spindle Travel, 200 to 3630 rpm Spindle Speed, 16 Spindle Speed, 29-1/8 in Spindle to Table Distance, 8-1/4 in Spindle to Column Distance, 13-3/4 in Table, 19.63 lb Table Load, 45 deg Table Tilt, 11-1/8 x 19-5/8 in Base, 3-1/8 in Column Dia, 3/4 hp, 115/230 VAC, 9/4.5 A, 12-3/4 in L x 23-1/2 in W x 54-1/2 in H
- Floor drill presses, also known as standing drill presses, offer more power options than b
- Drill presses are used for several for countersinking, counter boring, drilling, reaming a
- Step pulleys are driven by a belt system that is manually changed to achieve a range of fi
- Single phase refers to one phase line (coil) that connects to and runs voltage through the
Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses, they are most suited for heavy duty operations
Drill presses are used for several for countersinking, counter boring, drilling, reaming and tapping operations, they are either mounted to a workbench or secured to the floor
Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds
Single phase refers to one phase line (coil) that connects to and runs voltage through the motor, single phase lines are not as efficient as three phase motors