JET® 321121 BDB-1340A Belt Drive With ACU-RITE 200S DRO, 13 in Swing Over Bed, 7-25/32 in Swing Over Cross Slide, 40 in Distance Between Centers, #5 Morse Taper (#3 Morse Taper) Spindle, 2 hp
54334468
MFG #: 321121
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Belt Drive
- Series: BDB-1340A
- Swing Over Bed: 13
- Swing Over Cross Slide: 7-25/32
- Distance Between Centers: 40
- Bed Width: 7-3/8
- Tailstock Taper Size: #3 Morse Taper
- Spindle Size: #5 Morse Taper (#3 Morse Taper)
- Spindle Speed: 60 to 1240
- Number of Spindle Speeds: 12
- Cross Travel: 6-5/16
- Tailstock Spindle Travel: 3-3/4
- Carriage Travel: 35
- Compound Travel: 2-11/16
- Maximum Cross Feed Rate per Revolution: 0.0006 to 0.013
- Maximum Longitudinal Feed Rate per Revolution: 0.0018 to 0.0374
- Horsepower: 2
- Voltage Rating: 230
- Dimensions: 71 x 32 x 45
JET® Bench Lathe, Belt Drive, Series: BDB-1340A, 13 in Swing Over Bed, 7-25/32 in Swing Over Cross Slide, 40 in Distance Between Centers, 7-3/8 in Bed Width, #3 Morse Taper Tailstock Taper, #5 Morse Taper (#3 Morse Taper) Spindle, 60 to 1240 rpm Spindle Speed, 12 Spindle Speed, 6-5/16 in Cross Travel, 3-3/4 in Tailstock Spindle Travel, 35 in Carriage Travel, 2-11/16 in Compound Travel, 0.0006 to 0.013 in Maximum Cross Feed Rate per Revolution, 0.0018 to 0.0374 in Maximum Longitudinal Feed Rate per Revolution, 2 hp, 230 VAC, 71 x 32 x 45 in
- Comes with an enclosed gearbox as a standard feature
- Enclosed gear box design provides smooth, quiet operation
- Fast, easy speed changes
- Low voltage motor controls
- Helical cut headstock gears reduce noise
- Change gears allow metric threading
- Spindle is supported by precision tapered roller bearings
- V-way bed is induction hardened and ground
- Gap bed section provided for large diameter work
- Independent leadscrew and feed rod
- T-slotted compound slide featuring four-way tool post
- Carriage mounted spindle control lever
- Automatic feeding and threading are fully interlocked
- Feed selectors travel in grooved ways
- Tailstock may be offset for turning tapers and includes an inch metric graduated quill
- 6 in 3-jaw direct mount scroll chuck with top reversing jaws, 8 in 4-jaw independent chuck
- Four-way tool post, steady and follow rest, metric change gear, centers and headstock cent
- 38 longitudinal/cross feed rates
- 23 metric threads
- 5/8 in x 5/8 in max tool size, 18-3/4 in swing through gap, 13 in swing over bed, 0.45 - 1
Comes with an enclosed gearbox as a standard feature
Enclosed gear box design provides smooth, quiet operation
Fast, easy speed changes
Low voltage motor controls
Helical cut headstock gears reduce noise
Change gears allow metric threading
Spindle is supported by precision tapered roller bearings
V-way bed is induction hardened and ground
Gap bed section provided for large diameter work
Independent leadscrew and feed rod
T-slotted compound slide featuring four-way tool post
Carriage mounted spindle control lever
Automatic feeding and threading are fully interlocked
Feed selectors travel in grooved ways
Tailstock may be offset for turning tapers and includes an inch metric graduated quill
6 in 3-jaw direct mount scroll chuck with top reversing jaws, 8 in 4-jaw independent chuck and 12 in faceplate
Four-way tool post, steady and follow rest, metric change gear, centers and headstock center sleeves and threading dial
38 longitudinal/cross feed rates
23 metric threads
5/8 in x 5/8 in max tool size, 18-3/4 in swing through gap, 13 in swing over bed, 0.45 - 10 metric threads, 2-5/8 in steady rest capacity, 38 number of inch threads, D1-4 spindle mount, 2-3/4 in follow rest capacity, 1-3/8 in spindle bore, 3-1/2 - 80 TPI, 13 in x 40 in size, 8 in length, 230 V prewired