CM® Lodestar® 3121 Single Reeving Electric Chain Hoist, 0.25 ton Load, 15 ft H Lifting, 1/4 hp Power Rating, 115 VAC
10563121
MFG #: 3121
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Single Reeving
- Series: Classic Lodestar®
- Load Capacity: 0.25 ton
- Lifting Height: 15
- Lift Speed: 16 FPM
- Control Type: 1-Speed/NEMA 4X Control Station
- Power Rating: 1/4
- Voltage Rating: 115
CM® Lodestar® Electric Chain Hoist, Single Reeving, 0.25 ton, 15 ft Lifting Height, 16 fpm Lift Speed, 1-Speed/NEMA 4X Control Station Control, 1/4 hp, 115 VAC, 14-1/4 in Headroom
- Quick-change voltage board change from low voltage to high voltage by simply repositioning
- Gear train lifetime lubricated with non-oxidizing grease
- Precision machined and hardened lift wheel with hardened chain guides for precise chain li
- Gearing designed for exceptionally long life and quiet operation
- Hoist duty motor, standard protector overload device and standard screw type limit switche
- Hardened, forged steel, latch type hooks and hoistaloy load chain for long, dependable ser
- No special tools required to disassemble
- Each hoist thoroughly inspected and tested to over 125 percent of rated load prior to ship
- H4 duty cycle
- Easy to install and maintenance
- Harsh environment hoists available for severe duty of plating, galvanizing and wash down a
- Hoists with climbing capability available for temporary rigging or lifting applications, m
- Hoists with creep control allow precise positioning through field adjustment within the ti
- Articulating suspension 3 ton only
Quick-change voltage board change from low voltage to high voltage by simply repositioning receptacle
Gear train lifetime lubricated with non-oxidizing grease
Precision machined and hardened lift wheel with hardened chain guides for precise chain lift wheel fit
Gearing designed for exceptionally long life and quiet operation
Hoist duty motor, standard protector overload device and standard screw type limit switches
Hardened, forged steel, latch type hooks and hoistaloy load chain for long, dependable service
No special tools required to disassemble
Each hoist thoroughly inspected and tested to over 125 percent of rated load prior to shipment
H4 duty cycle
Easy to install and maintenance
Harsh environment hoists available for severe duty of plating, galvanizing and wash down applications
Hoists with climbing capability available for temporary rigging or lifting applications, must be used in inverted position only
Hoists with creep control allow precise positioning through field adjustment within the time delay range of 0.05 sec to 3 sec
Articulating suspension 3 ton only