Milwaukee® 6955-20 Dual Bevel Sliding Compound Miter Saw, 12 in Blade, 5/8 in, 1 in Arbor/Shank, 6 in Vertical, 13-1/2 in at 90 deg Cross Cut Cutting, 55 to 60 deg Miter, 48 deg Bevel
20222656
MFG #: 6955-20
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Bare Tool/Kit: Bare Tool
- Tool/Kit: Bare Tool, Kit, Tool Only
- Type: Dual Bevel
- Blade Size: 12
- Blade Type: Carbide Tip, Carbide Tipped
- Arbor/Shank Size: 5/8 in, 1 in, 5/8, 1
- Speed: 3200
- Cutting Capacity: 6 in Vertical, 13-1/2 in at 90 deg Cross Cut, 6 in Vertical, 13-1/2 in at 90 deg Cross-Cut
- Miter Capacity: 0.1 deg, 55 to 60
- Bevel Capacity: 48, 48 deg
- Bevel Stops: 0/15/22.5/33.85/45/48 deg Left/Right, Left and Right 0 deg, 15 deg, 22.5 deg, 33.85 deg, 45 deg, 48 deg, Left and Right 0 deg/15 deg/22.5 deg/33.85 deg/45 deg/48 deg
- Horsepower: 3.3
- Voltage Rating: 120
- Amperage Rating: 15
- Housing Material: Steel
- Cord Type: 17-1/2, 17-1/2 in
- Dimensions: 23 in L x 21-3/4 in W x 32 in H
Milwaukee® Sliding Compound Miter Saw, Dual Bevel, 12 in Blade, Carbide Tipped Blade, 5/8 in, 1 in Arbor/Shank, 3200 rpm Speed, Cutting Capacity: 6 in Vertical, 13-1/2 in at 90 deg Cross Cut, Miter Capacity: 55 to 60 deg, Bevel Capacity: 48 deg, Bevel Stops: 0/15/22.5/33.85/45/48 deg Left/Right, 3.3 hp, 120 VAC, 15 A, Steel Housing Material, 23 in L x 21-3/4 in W x 32 in H Dimensions
- Miter angle digital
- Powerful 15 A, 3.3 max hp direct drive motor provides increased power for high performance
- Miter angle fine adj
- Constant power Technology™ with soft start maintains constant cutting speed under load and
- Integral dust channel captures up to 75% of the dust and debris cut
- Dual integral jobsit
- Dual horizontal steel rails with three large linear bearings deliver smooth sliding action
- Over sized single lever bevel adjustment with (9) positive bevel stops allows the saw to e
- Maximum bevel capaci
- Oversized single lev
Miter angle digital readout- provides repeatable accuracy to 0.1 deg
Powerful 15 A, 3.3 max hp direct drive motor provides increased power for high performance cutting in hard lumber
Miter angle fine adjust with detent override- makes it simple to dial-in precise miter angles
Constant power Technology™ with soft start maintains constant cutting speed under load and decreases start up head movement
Integral dust channel captures up to 75% of the dust and debris cut
Dual integral jobsite lights fully illuminate the work piece and cut line from either side of the blade
Dual horizontal steel rails with three large linear bearings deliver smooth sliding action
Over sized single lever bevel adjustment with (9) positive bevel stops allows the saw to easily bevel left and right 0 - 48 deg and provides fast as well as accurate adjustments
Maximum bevel capacity- 48 deg
Oversized single lever bevel adjustment with (9) positive bevel stops allows the saw to easily bevel left and right 0 to 48 deg and provides fast and accurate adjustments