3M™ Flexomount™ 021200-11666 400 Plate Mounting Tape, 36 yd L x 1 in W, 10 mil THK, Photopolymer Plate/Rubber, Soft Rubber Adhesive, Solid Vinyl Backing, Gray

19516667 MFG #: 021200-11666
  • Series: 400
  • Length: 36, 36 yd Roll
  • Width: 1, 1 in
  • Thickness: 10, 10 mil
  • Material Type: Photopolymer Plate/Rubber
  • Liner Material: 4 mil Polycoated Kraft Paper/Polyethylene
  • Color: Gray
  • Adhesive Material: Soft Rubber
  • Backing Material: Solid Vinyl
  • Maximum Operating Temperature: 130
  • Specifications Met: ASTM D3330/D3654
  • Adhesion Strength: 50 oz/in (Rubber)
  • Material: Photopolymer Plate/Rubber
  • Temperature Rating: 130 deg F
Flexomount™ Plate Mounting Tape, Series: 400, 36 yd Length, 1 in Width, 10 mil Thickness, Photopolymer Plate/Rubber, 4 mil Polycoated Kraft Paper/Polyethylene Liner, Gray, Soft Rubber Adhesive, Solid Vinyl Backing, 130 deg F Maximum Operating, Specifications Met: ASTM D3330/D3654
  • Offers excellent adhesion to both rubber and photopolymer plates
  • Flex mount tapes are
  • Provides uniform coverage of solids when halftone dot reproduction is not critical
  • The adhesives remove
  • Specially formulated for clean removal from plate and print cylinder or sleeve
  • Flexographic plate m
  • High adhesion helps reduce plate edge lifting
  • 0.010 in, Gray doubl
  • Flexomount™ tapes are used to mount flexographic print plates when printing solid and line
  • Gray vinyl tapes wit
  • The adhesives remove cleanly from the print plate and the print cylinder
  • Helps reduce edge li
  • Flexographic printing, flexographic printers
  • Helps minimize pin h
  • Flexographic plate mounting sticky back tape
  • Sleeve/stainless ste
Offers excellent adhesion to both rubber and photopolymer plates
• Flex mount tapes are used to mount flexographic print plates when printing solid and line work
Provides uniform coverage of solids when halftone dot reproduction is not critical
• The adhesives remove cleanly from the print plate and the print cylinder
Specially formulated for clean removal from plate and print cylinder or sleeve
• Flexographic plate mounting sticky back tape
High adhesion helps reduce plate edge lifting
• 0.010 in, Gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier
Flexomount™ tapes are used to mount flexographic print plates when printing solid and line work
• Gray vinyl tapes with high adhesion
The adhesives remove cleanly from the print plate and the print cylinder
• Helps reduce edge lifting
Flexographic printing, flexographic printers
• Helps minimize pin holing on solid work
Flexographic plate mounting sticky back tape
• Sleeve/stainless steel cylinder