3M™ Flexomount™ 021200-38570 400 Plate Mounting Tape, 36 yd L x 3/4 in W, 10 mil THK, Photopolymer Plate/Rubber, Soft Rubber Adhesive, Solid Vinyl Backing, Gray

19585704 MFG #: 021200-38570
  • Series: 400
  • Length: 36, 36 yd Roll
  • Width: 3/4, 3/4 in
  • Thickness: 10, 10 mil
  • Material Type: Photopolymer Plate/Rubber
  • Liner Material: 4 mil Polycoated Kraft Paper/Polyethylene
  • Color: Gray
  • Adhesive Material: Soft Rubber
  • Backing Material: Solid Vinyl
  • Maximum Operating Temperature: 130
  • Specifications Met: ASTM D3330/D3654
  • Adhesion Strength: 50 oz/in (Rubber)
  • Material: Photopolymer Plate/Rubber
  • Temperature Rating: 130 deg F
Flexomount™ Plate Mounting Tape, Series: 400, 36 yd Length, 3/4 in Width, 10 mil Thickness, Photopolymer Plate/Rubber, 4 mil Polycoated Kraft Paper/Polyethylene Liner, Gray, Soft Rubber Adhesive, Solid Vinyl Backing, 130 deg F Maximum Operating, Specifications Met: ASTM D3330/D3654
  • Flex mount tapes are
  • Offers excellent adhesion to both rubber and photopolymer plates
  • Provides uniform coverage of solids when halftone dot reproduction is not critical
  • The adhesives remove
  • Flexographic plate m
  • Specially formulated for clean removal from plate and print cylinder or sleeve
  • High adhesion helps reduce plate edge lifting
  • 0.010 in, Gray doubl
  • Flexomount™ tapes are used to mount flexographic print plates when printing solid and line
  • Gray vinyl tapes wit
  • The adhesives remove cleanly from the print plate and the print cylinder
  • Helps reduce edge li
  • Flexographic printing, flexographic printers
  • Helps minimize pin h
  • Flexographic plate mounting sticky back tape
  • Sleeve/stainless ste
• Flex mount tapes are used to mount flexographic print plates when printing solid and line work
Offers excellent adhesion to both rubber and photopolymer plates
Provides uniform coverage of solids when halftone dot reproduction is not critical
• The adhesives remove cleanly from the print plate and the print cylinder
• Flexographic plate mounting sticky back tape
Specially formulated for clean removal from plate and print cylinder or sleeve
High adhesion helps reduce plate edge lifting
• 0.010 in, Gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier
Flexomount™ tapes are used to mount flexographic print plates when printing solid and line work
• Gray vinyl tapes with high adhesion
The adhesives remove cleanly from the print plate and the print cylinder
• Helps reduce edge lifting
Flexographic printing, flexographic printers
• Helps minimize pin holing on solid work
Flexographic plate mounting sticky back tape
• Sleeve/stainless steel cylinder