Merit® PowerFlex® Charger™ 63642503537 R822 Jumbo High Density Coated Abrasive Flap Disc, 7 in Dia, 7/8 in Center Hole, P80 Grit, Coarse Grade, Zirconia Alumina Abrasive, Type 27/Flat Disc

15603537 MFG #: 63642503537
  • Brand: Merit®, Merit®
  • Type: Jumbo High Density
  • Series: R822
  • Diameter: 7, 7 in
  • Arbor/Shank Size: 7/8
  • Grit/Grade: 80/Medium
  • Grit: P80
  • Grade: Coarse
  • Abrasive Material: Zirconia Alumina
  • Type/Shape: Type 27
  • Applicable Materials: Steel, Metals and Other Exotic Materials
  • Arbor/Shank Size: 7/8
  • Backing Material: Fiberglass
  • Bond Type: Resin
  • Center Hole Size: 7/8
  • Disc Diameter: 7
  • Disc Type: Type 27/Flat
  • Grit/Grade: 80/Medium
  • Maximum Speed: 8600
  • Type/Shape: Type 27
Merit® PowerFlex® Charger™ Coated Abrasive Flap Disc, Jumbo High Density, Series: R822, 7 in Disc Dia, 7/8 in Center Hole, P80 Grit, Coarse Grade, Zirconia Alumina Abrasive, Type 27/Flat Disc, Fiberglass Backing, 8600 rpm Maximum
  • One step grinding an
  • Phenolic resin backi
  • Eliminates depressed
  • Extends disc life
  • No back-up pad neede
  • Thicker, with more f
  • Up to 40% longer lif
  • Produces a smooth fi
  • High performance zir
  • Aggressive cut and l
  • Better tier
  • Less pressure for ag
  • Conical flap discs h
  • The angle provides g
  • The best choice when
  • Grind at 15 to 25 de
• One step grinding and finishing
• Phenolic resin backing construction
• Eliminates depressed center wheel/fiber disc two-step process
• Extends disc life
• No back-up pad needed
• Thicker, with more flaps
• Up to 40% longer life than standard flap discs
• Produces a smooth finish on shapes and irregular surfaces
• High performance zirconia alumina abrasive
• Aggressive cut and long life
• Better tier
• Less pressure for aggressive stock removal and long life
• Conical flap discs have angled flaps and may be used on both contoured and edge work
• The angle provides greater surface contact for stock removal on flat surfaces
• The best choice when speed and stock removal are primary considerations
• Grind at 15 to 25 deg flatter angles