Norton® Vortex® Rapid Prep™ 66623373675 Non-Woven Abrasive Disc, 7 in Dia, Coarse Grade, Aluminum Oxide Abrasive, Speed Change Fastener Attachment

15632823 MFG #: 66623373675
$0.00 / Each
Ships within 5 days
  • Attachment Type: Speed Change Fastener
  • Diameter: 7
  • Arbor/Shank Size: 5/8-11
  • Disc Diameter: 7
  • Abrasive Material: Aluminum Oxide
  • Grade: Coarse
Norton® Vortex® Rapid Prep™ Non-Woven Abrasive Disc, Speed Change Fastener Attachment, 7 in Diameter Disc, Aluminum Oxide Abrasive, Coarse Grade
QTY
  • Patented hole design allows interrupted cut, reducing heat up to 30% over standard surface
  • Patented hole design
  • Cool cutting results in longer disc life
  • Cool cutting results
  • Provides complete vision into the grinding zone
  • Provides complete vi
  • Operators can grind more accurately with less rework
  • Operators can grind
  • Scooped holes create air flow to pull loose abrasive and swarf away from work surface grin
  • Scooped holes create
  • 15 deg angle back up pad eliminates gouging of workpiece
  • 15 deg angle back up
  • Grinding at 5 to 15 deg angle allows greater utilization of disc surface
  • Grinding at 5 to 15
Patented hole design allows interrupted cut, reducing heat up to 30% over standard surface preparation discs
Patented hole design allows interrupted cut, reducing heat up to 30% over standard surface preparation discs
Cool cutting results in longer disc life
Cool cutting results in longer disc life
Provides complete vision into the grinding zone
Provides complete vision into the grinding zone
Operators can grind more accurately with less rework
Operators can grind more accurately with less rework
Scooped holes create air flow to pull loose abrasive and swarf away from work surface grinding zone resulting in extended disc life
Scooped holes create air flow to pull loose abrasive and swarf away from work surface grinding zone resulting in extended disc life
15 deg angle back up pad eliminates gouging of workpiece
15 deg angle back up pad eliminates gouging of workpiece
Grinding at 5 to 15 deg angle allows greater utilization of disc surface
Grinding at 5 to 15 deg angle allows greater utilization of disc surface