Norton® Vortex® Rapid Prep™ 66623373685 Non-Woven Abrasive Disc, 4-1/2 in Dia, Very Fine Grade, Aluminum Oxide Abrasive, Speed Change Fastener Attachment

15632818 MFG #: 66623373685
$0.00 / Each
Ships within 5 days
  • Attachment Type: Speed Change Fastener
  • Diameter: 4-1/2
  • Arbor/Shank Size: 5/8-11
  • Disc Diameter: 4-1/2
  • Abrasive Material: Aluminum Oxide
  • Grade: Very Fine
Norton® Vortex® Rapid Prep™ Non-Woven Abrasive Disc, Speed Change Fastener Attachment, 4-1/2 in Diameter Disc, Aluminum Oxide Abrasive, Very Fine Grade
QTY
  • Patented hole design
  • Patented hole design allows interrupted cut, reducing heat up to 30% over standard surface
  • Cool cutting results
  • Cool cutting results in longer disc life
  • Provides complete vi
  • Provides complete vision into the grinding zone
  • Operators can grind
  • Operators can grind more accurately with less rework
  • Scooped holes create
  • Scooped holes create air flow to pull loose abrasive and swarf away from work surface grin
  • 15 deg angle back up pad eliminates gouging of workpiece
  • 15 deg angle back up
  • Grinding at 5 to 15
  • Grinding at 5 to 15 deg angle allows greater utilization of disc surface
Patented hole design allows interrupted cut, reducing heat up to 30% over standard surface preparation discs
Patented hole design allows interrupted cut, reducing heat up to 30% over standard surface preparation discs
Cool cutting results in longer disc life
Cool cutting results in longer disc life
Provides complete vision into the grinding zone
Provides complete vision into the grinding zone
Operators can grind more accurately with less rework
Operators can grind more accurately with less rework
Scooped holes create air flow to pull loose abrasive and swarf away from work surface grinding zone resulting in extended disc life
Scooped holes create air flow to pull loose abrasive and swarf away from work surface grinding zone resulting in extended disc life
15 deg angle back up pad eliminates gouging of workpiece
15 deg angle back up pad eliminates gouging of workpiece
Grinding at 5 to 15 deg angle allows greater utilization of disc surface
Grinding at 5 to 15 deg angle allows greater utilization of disc surface