TPI E3313TRP 3310 1-Phase Standard Fan Forced Wall Heater With In-Built Single Pole Thermostat, 5120/2560 Btu, 120 VAC, 12.5 A, 1500/750 W

TPI E3313TRP MFG #: E3313TRP
  • Brand: TPI
  • Type: 1-Phase Fan Forced Standard, 1-Phase Standard
  • Series: 3310
  • Capacity: 5120/2560
  • Voltage Rating: 120
  • Amperage Rating: 12.5, 12.5 A, 6.25 A
  • Power Rating: 1500/750
  • Flow Rate: 175
  • Speed: 600
  • Temperature Rating: 90
  • Mounting Type: Wall
  • Material: Steel
  • Color: Ivory
  • Finish: Powder Coated
  • Dimensions: 19-15/16 in H x 14-3/16 in W x 4 in D
TPI Fan Forced Wall Heater, 1-Phase Standard, Series: 3310, 5120/2560 Btu, 120 VAC, 12.5 A, 1500/750 W, 175 cfm, 600 rpm, 90 deg F, Wall Mount, Steel, Ivory, Powder Coated, 19-15/16 in H x 14-3/16 in W x 4 in D
  • Powder coated 18 ga steel front
  • Powder coated 18 ga steel front
  • Automatic reset thermal limit for safety
  • Automatic reset thermal limit
  • Steel block fin element
  • Steel block fin element
  • 20-9/64 in H x 15-3/8 in W grill
  • 600 rpm/175 cfm vane axial fan blade
  • Units with dual wattage, factory wired to highest wattage
  • 15-3/8 in W x 20-9/64 in H grill
  • Wattage selectable at time of installation on some models
  • Unit with dual wattage, factory wired to highest wattage
  • Wattage selectable at time of installation on some models
  • Furnish and install electric forced air heaters where specified
  • The heaters shall be constructed of a heavy gauge steel housing
  • The heaters shall have a low speed 600 rpm motor which drives a vane axial blower to deliv
  • The heating element shall be of the sealed block fin type with large, parallel steel fins
  • Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan
  • The in-built thermostat shall be calibrated to provide a range of 0 to 110 deg F
Powder coated 18 ga steel front
Powder coated 18 ga steel front
Automatic reset thermal limit for safety
Automatic reset thermal limit
Steel block fin element
Steel block fin element
20-9/64 in H x 15-3/8 in W grill
600 rpm/175 cfm vane axial fan blade
Units with dual wattage, factory wired to highest wattage
15-3/8 in W x 20-9/64 in H grill
Wattage selectable at time of installation on some models
Unit with dual wattage, factory wired to highest wattage
Wattage selectable at time of installation on some models
Furnish and install electric forced air heaters where specified
The heaters shall be constructed of a heavy gauge steel housing
The heaters shall have a low speed 600 rpm motor which drives a vane axial blower to deliver a quiet 175 cfm of down flow air
The heating element shall be of the sealed block fin type with large, parallel steel fins for quick heat transfer
Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan only operation, and is available with a single pole, or double pole built-in thermostat, or no thermostat
The in-built thermostat shall be calibrated to provide a range of 0 to 110 deg F