Union Butterfield® 1010271 1599 Straight Flute Hand Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, Nitride/Steam Oxide, HSS
25824702
MFG #: 1010271
- Brand: Union Butterfield®
- Series: 1599
- Measurement System: Imperial
- Thread Standard: UNF
- Thread Size: 7/16-20
- Chamfer Type: Bottoming
- Number of Flutes: 4
- Material: HSS
- Finish/Coating: Nitride/Steam Oxide
- Class of Fit: 3B
- Cutting Direction: Right Hand
- Thread Length: 1-7/16
- Overall Length: 3-5/32
- Shank Diameter: 0.323
- Material Application: Cast Iron, Copper and Synthetic Materials
- Thread Limit: H3
Union Butterfield® Straight Flute Hand Tap, Series: 1599, Measurement System: Imperial, UNF, 7/16-20, Bottoming Chamfer, 4 Flutes, HSS, Nitride/Steam Oxide, Class of Fit: 3B, Right Hand Cutting, 1-7/16 in Thread Length, 3-5/32 in Overall Length, 0.323 in Shank Dia, Cast Iron, Copper and Synthetic Materials Material Application, H3 Thread Limit
- Designed for through
- Also ideal for non-m
- Nitride and steam ox
- Nitriding is a proce
- It is particularly s
- Nitriding is used on
- Steam tempering give
- Steam tempering can
- A medium alloyed hig
- HSS exhibits hardnes
• Designed for through or blind hole tapping with a specific cutting geometry for gray cast irons and those materials producing broken chips
• Also ideal for non-metallics, cast brass and other brass materials producing broken powdery chips
• Nitride and steam oxide coating reduces wear and chip welding in abrasive materials
• Nitriding is a process that is used to increase the hardness and wear resistance of the surface of a tool
• It is particularly suitable for taps that are used on abrasive materials such as cast iron, bakelite
• Nitriding is used on twist drills when it is desirable to increase the strength and wear resistance of the cylindrical lands
• Steam tempering gives a strongly adhering blue oxide surface that acts to retain cutting fluid and prevent chip to tool welding, thereby counteracting the formation of a built-up edge
• Steam tempering can be applied to any bright tool but is most effective on drills and taps
• A medium alloyed high speed steel that has good machinability and good performance
• HSS exhibits hardness, toughness and wear resistance characteristics that make it attractive in a wide range of applications