Union Butterfield® 1011276 1600 Straight Flute Hand Tap, Right Hand Cutting, 9/16-12 Thread, H5 Thread Limit, Plug Chamfer, 4 Flutes, Nitride/Steam Oxide, HSS

25825082 MFG #: 1011276
  • Brand: Union Butterfield®
  • Series: 1600
  • Measurement System: Imperial
  • Thread Standard: UNC
  • Thread Size: 9/16-12
  • Chamfer Type: Plug
  • Number of Flutes: 4
  • Material: HSS
  • Finish/Coating: Nitride/Steam Oxide
  • Class of Fit: 2B
  • Cutting Direction: Right Hand
  • Thread Length: 1-21/32
  • Overall Length: 3-19/32
  • Shank Diameter: 0.429
  • Material Application: Cast Iron, Copper and Synthetic Materials
  • Thread Limit: H5
Union Butterfield® Straight Flute Hand Tap, Series: 1600, Measurement System: Imperial, UNC, 9/16-12, Plug Chamfer, 4 Flutes, HSS, Nitride/Steam Oxide, Class of Fit: 2B, Right Hand Cutting, 1-21/32 in Thread Length, 3-19/32 in Overall Length, 0.429 in Shank Dia, Cast Iron, Copper and Synthetic Materials Material Application, H5 Thread Limit
  • Designed for through
  • Also ideal for non-m
  • Nitride and steam ox
  • Nitriding is a proce
  • It is particularly s
  • Nitriding is used on
  • Steam tempering give
  • Steam tempering can
  • A medium alloyed hig
  • HSS exhibits hardnes
• Designed for through or blind hole tapping with a specific cutting geometry for gray cast irons and those materials producing broken chips
• Also ideal for non-metallics, cast brass and other brass materials producing broken powdery chips
• Nitride and steam oxide coating reduces wear and chip welding in abrasive materials
• Nitriding is a process that is used to increase the hardness and wear resistance of the surface of a tool
• It is particularly suitable for taps that are used on abrasive materials such as cast iron, bakelite
• Nitriding is used on twist drills when it is desirable to increase the strength and wear resistance of the cylindrical lands
• Steam tempering gives a strongly adhering blue oxide surface that acts to retain cutting fluid and prevent chip to tool welding, thereby counteracting the formation of a built-up edge
• Steam tempering can be applied to any bright tool but is most effective on drills and taps
• A medium alloyed high speed steel that has good machinability and good performance
• HSS exhibits hardness, toughness and wear resistance characteristics that make it attractive in a wide range of applications