/ Each
Anvil® 0500173125 FIG 260 Adjustable Clevis Hanger, 6 in Pipe, 3/4 in Rod, 1940 lb Load, Carbon Steel, Black Oxide
Part #27712051
Legacy #27712051
MFG #0500173125
Anvil® Clevis Hanger, Adjustable, Series: FIG 260, 6 in Pipe, 3/4 in Rod, 1940 lb, Carbon Steel, Black Oxide
/ Each
Product Attributes
Brand : Anvil®
Type : Adjustable
Series : FIG 260
Pipe Size : 6
Rod Size : 3/4
Load Capacity : 1940
Product Documents
Product Features
- Hanger load nut above clevis must be tightened securely to assure proper hanger performance
- Hanger load nut above clevis must be tightened securely to assure proper hanger performance
- Hanger load nut above clevis must be tightened securely to assure proper hanger performance
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
- Tighten upper nut after adjustment
- Tighten upper nut after adjustment
- Tighten upper nut after adjustment
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
- Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
- Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
- Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane