Oatey® 30818 All Purpose Medium Body Solvent Cement, 4 oz Container, Milky Clear
00121627
MFG #: 30818
$0.00
/ Each
In Stock
- Type: All Purpose, All Purpose Medium Body
- Container Size: 4
- Container Type: Can
- Net Weight: 0.36
- Suitable For Use With: Upto 12 in Dia ABS, PVC, CPVC Pipe and Fittings
- Form: Liquid
- Color: Milky Clear
- Odor/Scent: Solvent
- VOC Content: 380
- Flash Point: 14 to 23
- Composition: Furan, Tetrahydro, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Polyvinyl Chloride, Ethene, Chloro-Homopolymer, Chlorinated, Silica, Amorphous, Fumed
- Specific Gravity: 0.94
- Setting Time: 5 to 6
- Curing Time: 2
- Temperature Rating: 40 to 110
Oatey® Solvent Cement, All Purpose Medium Body, 4 oz Container, For Use With: Upto 12 in Dia ABS, PVC, CPVC Pipe and Fittings, Milky Clear, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Polyvinyl Chloride, Ethene, Chloro-Homopolymer, Chlorinated, Silica, Amorphous, Fumed, 5 to 6 min Setting, 2 hr Curing, 40 to 110 deg F
- Medium-bodied milky-
- Medium bodied milky clear cement for use on all schedules and classes of ABS, PVC and CPVC
- Lo-VOC solvent cemen
- Always check local codes for acceptability of this product
- Recommended for pota
- 5 to 6 min at 30 to 50 deg F/3 to 4 min 50 to 70 deg F/1 to 2 min at 70 to 90 deg F settin
- Always check local c
- 250 psi (2 hr)/500 p
- Minimum 500 cps at 7
- 7.79 +/- 0.2 lbs/gal
- 5 to 6 min (30 to 50
• Medium-bodied milky-clear cement for use on all schedules and classes of ABS, PVC and CPVC* pipe and fittings up to 6 in diameter with interference fit
Medium bodied milky clear cement for use on all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in diameter with interference fit
• Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
Always check local codes for acceptability of this product
• Recommended for potable water, pressure pipe, conduit and DWV
5 to 6 min at 30 to 50 deg F/3 to 4 min 50 to 70 deg F/1 to 2 min at 70 to 90 deg F setting
• Always check local codes for acceptability of this product
• 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength
• Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
• 7.79 +/- 0.2 lbs/gallon density
• 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting