DeWALT® 7404SD1 SD1 Expansion Wedge Anchor, 1/4 in Dia, 3-1/4 in OAL, 2-1/4 in L Thread, Carbon Steel, Zinc Plated
DEWALT 7404SD1-PWR
MFG #: 7404SD1
$0.00
/ Box of 100
In Stock
- Type: Expansion
- Series: Strong-Bolt® 2
- Diameter: 1/4
- Overall Length: 3-1/4
- Thread Length: 2-1/4, 2-7/16
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 1-1/8, 1-3/4
- Head Size: 7/16
- Drill Size: 1/4
- Head Type: Hex
- Thread Size: 1/4-20, 2-7/16
- Head Style: Hex
- Thread Type: UNC
- Maximum Work Thickness: 3-1/4
- Shear Strength: 1255
- Tensile Strength: 1435, 70000
DeWALT®, 7404SD1, Wedge Anchor, Expansion, Series: SD1, 1/4 in Diameter, 3-1/4 in Overall Length, 2-1/4 in Thread Length, Carbon Steel, Zinc Plated, 1-1/8 in Minimum Embedment Depth, 1/4 in Drill, 1/4-20 Thread, Hex Head, UNC Thread, 1-7/8 in Maximum Work Thickness, 1255 lb Shear Strength, 1435 lb Tensile Strength
- Consistent performan
- Consistent performance in high and low strength concrete
- Tri-segmented clip, each segment adjusts independently, increasing follow-up expansion, sh
- Nominal drill bit si
- Nominal drill bit size is the same as the anchor diameter
- Dual embossments on each clip segment, enable the clip to undercut into the concrete, ther
- Anchor can be instal
- Anchor can be installed through standard fixture holes
- Standard (ANSI) fractional anchor, The Strong-Bolt 2 is sized to fit most fixtures and it
- Anchor design allows for follow-up expansion after setting under tensile loading
- Standard fractional sizes fits standard fixtures and installs with common drill bit and to
- Length ID code and i
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel stud with special alloy clip
- Anchor design allows
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- Carbon steel ASTM A563 grade A nut
- Normal weight concre
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- Carbon steel ASTM F844 washer
- Carbon steel ASTM A568 clip
- 5/16 in Dia baseplate clearance hole
- 4 ft-lb installation torque
- 1-7/8 in D minimum hole
- 56000 psi yield strength
- 5/16 in minimum fixture hole
Consistent performance in high and low strength concrete
Consistent performance in high and low strength concrete
Tri-segmented clip, each segment adjusts independently, increasing follow-up expansion, should the hole increase in size as a result of a crack
Nominal drill bit size is the same as the anchor diameter
Nominal drill bit size is the same as the anchor diameter
Dual embossments on each clip segment, enable the clip to undercut into the concrete, thereby increasing follow-up expansion should a crack occur
Anchor can be installed through standard fixture holes
Anchor can be installed through standard fixture holes
Standard (ANSI) fractional anchor, The Strong-Bolt 2 is sized to fit most fixtures and it installs with common drill bit sizes and tools
Anchor design allows for follow-up expansion after setting under tensile loading
Standard fractional sizes fits standard fixtures and installs with common drill bit and tool sizes
Length ID code and identifying marking stamped on head of each anchor
Length ID code and identifying marking stamped on head of each anchor
Carbon steel stud with special alloy clip
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Carbon steel ASTM A563 grade A nut
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Carbon steel ASTM F844 washer
Carbon steel ASTM A568 clip
5/16 in Dia baseplate clearance hole
4 ft-lb installation torque
1-7/8 in D minimum hole
56000 psi yield strength
5/16 in minimum fixture hole