/ Box of 50
DeWALT® 7410SD1 SD1 Expansion Wedge Anchor, 3/8 in Dia, 2-1/4 in OAL, 7/8 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7410SD1-PWR
Legacy #08317056
MFG #7410SD1
DeWALT®, 7410SD1, Wedge Anchor, Expansion, Series: SD1, 3/8 in Diameter, 2-1/4 in Overall Length, 7/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, 3/8-16 Thread, Hex Head, UNC Thread, 1/4 in Maximum Work Thickness, 2540 lb Shear Strength, 2685 lb Tensile Strength
/ Box of 50
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : Wedge-All®
Diameter : 3/8
Overall Length : 2-1/4
Thread Length : 1-1/8, 7/8
Product Documents
Product Features
- Consistent performance in high and low strength concrete
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Nominal drill bit size is the same as the anchor diameter
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor can be installed through standard fixture holes
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Available in a wide range of diameters and lengths
- Anchor design allows for follow-up expansion after setting under tensile loading
- Carbon steel ASTM A563 grade A nut
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and identifying marking stamped on head of each anchor
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- The allowable loads are based on a safety factor of 4
- 7/16 in minimum fixture hole
- 30 ft-lb installation torque
- 1560 lb at 2000 psi, 2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555 lb at 3000 psi, 720 at 4000 psi allowable tension load for concrete
- 2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear load for concrete
- Anchor body material meets minimum 70000 psi tensile strength