/ Box of 50
DeWALT® 7416SD1 SD1 Expansion Wedge Anchor, 3/8 in Dia, 5 in OAL, 3-5/8 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7416SD1-PWR
Legacy #08317057
MFG #7416SD1
DeWALT®, 7416SD1, Wedge Anchor, Expansion, Series: SD1, 3/8 in Diameter, 5 in Overall Length, 3-5/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, 3/8-16 Thread, Hex Head, UNC Thread, 3 in Maximum Work Thickness, 2540 lb Shear Strength, 2685 lb Tensile Strength
/ Box of 50
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : Wedge-All®
Diameter : 3/8
Overall Length : 5
Thread Length : 3-5/8, 3-7/8
Product Documents
Product Features
- Consistent performance in high and low strength concrete
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Nominal drill bit size is the same as the anchor diameter
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor can be installed through standard fixture holes
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide range of diameters and lengths
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel ASTM A563 grade A nut
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- The allowable loads are based on a safety factor of 4
- 7/16 in minimum fixture hole
- 30 ft-lb installation torque
- 1560 lb at 2000 psi/2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555 lb at 3000 psi, 720 at 4000 psi allowable tension load for concrete
- 2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear load for concrete
- Anchor body material meets minimum 70000 psi tensile strength