/ Box of 50
DeWALT® 7422SD1 SD1 Wedge Expansion Anchor, 1/2 in Dia, 3-3/4 in OAL, 2 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7422SD1-PWR
Legacy #08396197
MFG #7422SD1
DeWALT®, 7422SD1, Wedge Expansion Anchor, Series: SD1, 1/2 in Diameter, 3-3/4 in Overall Length, 2 in Thread Length, Carbon Steel, Zinc Plated, 2-1/4 in Minimum Embedment Depth, 1/2-13 Thread, Threaded Stud Head, UNC Thread, 1 in Maximum Work Thickness, 4195 lb Shear Strength, 4155 lb Tensile Strength
/ Box of 50
Product Attributes
Brand : DeWALT®
Series : Wedge-All®
Diameter : 1/2
Overall Length : 3-3/4, 3-3/4 in
Thread Length : 2, 2 in, 2-5/16
Material : Carbon Steel
Product Documents
Product Features
- • Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete
- Ultimate load capacity: 3800 lb tensile strength when embedded in 2500 psi, 4155 lb tensile strength when embedded in 3000 psi and 4800 lb tensile strength when embedded in 4000 psi compressive strength concrete
- • One-piece, wrap-around clip ensures uniform holding capacity
- One-piece, wrap-around clip ensures uniform holding capacity
- Suitable base materials include normal-weight concrete, structural sand-lightweight
- • Threaded end is chamfered for ease of starting nut
- 4195 lb ultimate load, 4195 lb 3000 psi concrete, 4195 lb 4000 psi concrete
- Suitable base materials include normal-weight concrete, structural sand-lightweight
- Threaded end is chamfered for ease of starting nut
- 4195 lb ultimate load, 4195 lb 3000 psi concrete, 4195 lb 4000 psi concrete
- Anchor can be installed through standard fixture holes
- • Available in a wide range of diameters and lengths
- 4155 lb, 4155 lb 3000 psi concrete, 4500 lb 4000 psi concrete
- Available in a wide range of diameters and lengths
- 4155 lb, 4155 lb 3000 psi concrete, 4500 lb 4000 psi concrete
- Anchor design allows for follow-up expansion after setting under tensile loading
- Carbon steel ASTM A563 grade A nut
- Nominal drill bit diameter same as Anchor diameter
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Length ID code and identifying marking stamped on head of each Anchor
- The allowable loads are based on a safety factor of 4
- 9/16 in minimum fixture hole
- 60 ft-lb installation torque
- 3280 lb at 2000 psi/5280 lb at 4000 psi ultimate tension loads and 820 lb at 2000 psi, 1360 lb at 4000 allowable tension loads for concrete
- 6560 lb at 2000 psi ultimate and 1345 lb at 2000 psi, 1485 lb at 3000 psi, 1625 lb at 4000 psi allowable shear loads for concrete
- Anchor body material meets minimum 70000 psi tensile strength