DeWALT® Power-Stud+® SD1 7426SD1 Expansion Wedge Anchor, 1/2 in Dia, 7 in OAL, 5-1/4 in L Thread, Carbon Steel, Zinc Plated
08317049
MFG #: 7426SD1
$0.00
/ Box of 25
In Stock
- Type: Expansion
- Series: Wedge-All®
- Diameter: 1/2
- Overall Length: 7
- Thread Length: 4-9/16, 5-1/4
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 2-1/4
- Head Size: 3/4
- Drill Size: 1/2
- Head Type: Hex
- Thread Size: 1/2-13
- Head Style: Hex
- Thread Type: UNC
- Shear Strength: 4195, 850
- Tensile Strength: 4155, 871
DeWALT® Power-Stud+® SD1 Wedge Anchor, Expansion, 1/2 in Dia, 7 in Overall Length, 5-1/4 in Thread Length, Carbon Steel, Zinc Plated, 2-1/4 in Minimum Embedment Depth, 1/2 in Drill, 1/2-13, Hex Head, UNC, 4195 lb Shear Strength, 4155 lb Tensile
- Consistent performan
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Nominal drill bit si
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor can be installed through standard fixture holes
- Anchor can be instal
- Threaded end is chamfered for ease of starting nut
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide range of diameters and lengths
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and i
- Carbon steel ASTM A563 grade A nut
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- Anchor design allows
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- Normal weight concre
- The allowable loads are based on a safety factor of 4
- 9/16 in minimum fixture hole
- 60 ft-lb installation torque
- 3280 lb at 2000 psi/5280 lb at 4000 psi ultimate tension loads and 820 lb at 2000 psi, 136
- 6560 lb at 2000 psi ultimate and 1345 lb at 2000 psi, 1485 lb at 3000 psi, 1625 lb at 4000
- Anchor body material meets minimum 70000 psi tensile strength
Consistent performance in high and low strength concrete
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Consistent performance in high and low strength concrete
Nominal drill bit size is the same as the anchor diameter
Nominal drill bit size is the same as the anchor diameter
One-piece, wrap-around clip ensures uniform holding capacity
Anchor can be installed through standard fixture holes
Anchor can be installed through standard fixture holes
Threaded end is chamfered for ease of starting nut
Anchor design allows for follow-up expansion after setting under tensile loading
Available in a wide range of diameters and lengths
Length ID code and identifying marking stamped on head of each anchor
Length ID code and identifying marking stamped on head of each anchor
Carbon steel ASTM A563 grade A nut
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
The minimum concrete thickness is 1-1/2 times the embedment depth
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
The allowable loads are based on a safety factor of 4
9/16 in minimum fixture hole
60 ft-lb installation torque
3280 lb at 2000 psi/5280 lb at 4000 psi ultimate tension loads and 820 lb at 2000 psi, 1360 lb at 4000 allowable tension loads for concrete
6560 lb at 2000 psi ultimate and 1345 lb at 2000 psi, 1485 lb at 3000 psi, 1625 lb at 4000 psi allowable shear loads for concrete
Anchor body material meets minimum 70000 psi tensile strength