DeWALT® Power-Stud+® SD1 7461SD1 Expansion Wedge Anchor, 1 in Dia, 6 in OAL, 2-3/8 in L Thread, Carbon Steel, Zinc Plated
08317052
MFG #: 7461SD1
$0.00
/ Box of 10
In Stock
- Type: Expansion
- Series: Wedge-All®
- Diameter: 1
- Overall Length: 6
- Thread Length: 2-1/4, 2-3/8
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 4-1/2
- Head Size: 1-1/2
- Drill Size: 1
- Head Type: Hex
- Thread Size: 1-8
- Head Style: Hex
- Thread Type: UNC
- Shear Strength: 1156, 21155
- Tensile Strength: 13850, 2440
DeWALT® Power-Stud+® SD1 Wedge Anchor, Expansion, 1 in Dia, 6 in Overall Length, 2-3/8 in Thread Length, Carbon Steel, Zinc Plated, 4-1/2 in Minimum Embedment Depth, 1 in Drill, 1-8, Hex Head, UNC, 21155 lb Shear Strength, 13850 lb Tensile
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performan
- One-piece, wrap-around clip ensures uniform holding capacity
- Nominal drill bit si
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Anchor can be instal
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide range of diameters and lengths
- Length ID code and i
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel ASTM A563 grade A nut
- Anchor design allows
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Normal weight concre
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- The allowable loads are based on a safety factor of 4
- 1-1/8 in minimum fixture hole
- 300 ft-lb installation torque
- 15400 lb at 2000 psi/15680 lb at 4000 psi ultimate tension loads and 3850 lb at 2000 psi,
- 22519 lb ultimate and 5730 lb allowable shear loads at 2000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength
Consistent performance in high and low strength concrete
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Consistent performance in high and low strength concrete
One-piece, wrap-around clip ensures uniform holding capacity
Nominal drill bit size is the same as the anchor diameter
Nominal drill bit size is the same as the anchor diameter
Anchor can be installed through standard fixture holes
Threaded end is chamfered for ease of starting nut
Anchor can be installed through standard fixture holes
Anchor design allows for follow-up expansion after setting under tensile loading
Available in a wide range of diameters and lengths
Length ID code and identifying marking stamped on head of each anchor
Length ID code and identifying marking stamped on head of each anchor
Carbon steel ASTM A563 grade A nut
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
The minimum concrete thickness is 1-1/2 times the embedment depth
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
The allowable loads are based on a safety factor of 4
1-1/8 in minimum fixture hole
300 ft-lb installation torque
15400 lb at 2000 psi/15680 lb at 4000 psi ultimate tension loads and 3850 lb at 2000 psi, 3885 lb at 3000 psi, 3920 lb at 4000 psi for concrete
22519 lb ultimate and 5730 lb allowable shear loads at 2000 psi for concrete
Anchor body material meets minimum 70000 psi tensile strength