Anvil® 0500009170 FIG 93 Universal Wide Throat C-Clamp With Lock Nut, 3/8 in Rod, 1-1/4 in THK Flange, 950 lb Top/760 lb Bottom Load, Ductile Iron, Plain
09900466
MFG #: 0500009170
$0.00
/ Each
In Stock
- Type: Type C, Universal Wide Throat
- Series: FIG 93
- Rod Size: 3/8
- Flange Thickness: 1-1/4
- Load Capacity: 950, 950 lb Top/760 lb Bottom
- Material: Ductile Iron
- Finish: Black, Plain
- Specifications: 125 in-lb Torque
- Temperature Rating: 450
Anvil® C-Clamp, Universal Wide Throat, Series: FIG 93, 3/8 in Rod, 1-1/4 in Flange Thickness, 950 lb Top/760 lb Bottom, 125 in-lb Torque, Ductile Iron, Plain, 450 deg F
- Attached to horizont
- Attached to horizontal flanges of structural members in either the top beam or bottom beam
- Secured in place by
- Secured in place by a cup-pointed set screw tightened against the flange
- A jam nut is provide
- A jam nut is provided for tightening the set screw against the body casting
- Thru tapping of the body casting permits extended adjustment of the threaded rod
- Thru tapping of the
- Wider throat for att
- Wider throat for attaching to flange with up to 1-1/4 in THK
- Recommended for use under roof installations with bar joist type constructions, or for att
- Hardened steel cup p
- Hardened steel cup point set screw and locknut
Attached to horizontal flanges of structural members in either the top beam or bottom beam positions
Attached to horizontal flanges of structural members in either the top beam or bottom beam positions
Secured in place by a cup-pointed set screw tightened against the flange
Secured in place by a cup-pointed set screw tightened against the flange
A jam nut is provided for tightening the set screw against the body casting
A jam nut is provided for tightening the set screw against the body casting
Thru tapping of the body casting permits extended adjustment of the threaded rod
Thru tapping of the body casting permits extended adjustment of the threaded rod
Wider throat for attaching to flange with up to 1-1/4 in THK
Wider throat for attaching to flange with up to 1-1/4 in THK
Recommended for use under roof installations with bar joist type constructions, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1-1/2 in
Hardened steel cup point set screw and locknut
Hardened steel cup point set screw and locknut