Anvil® 0500007406 FIG 86 C-Clamp With Set Screw and Lock Nut, 3/8 in Rod, 400 lb, Malleable Iron

09900196 MFG #: 0500007406
Anvil® 0500007406 FIG 86 C-Clamp With Set Screw and Lock Nut, 3/8 in Rod, 400 lb, Malleable Iron
Anvil® C-Clamp, Series: FIG 86, 3/8 in Rod, 400 lb, 60 in-lbs Torque, Malleable Iron, 450 deg F
  • For attachment to "W
  • For attachment to "W" and "M" beams where thickness of flange Z does not exceed 0.75 in, W
  • Malleable body assur
  • Malleable body assures: Uniform quality and strength, full thread engagement
  • Hardened steel cup p
  • Hardened steel cup point set screw for securing to beam flange
  • Ribbed design of cla
  • Ribbed design of clamp provides added strength
  • Installation: follow
  • Installation: follow recommended set screw torque values per MSS-SP-69 and the Fig. 88 is
  • 60 in-lbs torque
  • 60 in-lbs torque
• For attachment to "W" and "M" beams where thickness of flange Z does not exceed 0.75 in, When clamp is used with Fig 89 retaining clip, flange thickness may not exceed 0.62 in
For attachment to "W" and "M" beams where thickness of flange Z does not exceed 0.75 in, When clamp is used with Fig 89 retaining clip, flange thickness may not exceed 0.62 in
• Malleable body assures: Uniform quality and strength, full thread engagement
Malleable body assures: Uniform quality and strength, full thread engagement
• Hardened steel cup point set screw for securing to beam flange
Hardened steel cup point set screw for securing to beam flange
• Ribbed design of clamp provides added strength
Ribbed design of clamp provides added strength
• Installation: follow recommended set screw torque values per MSS-SP-69 and the Fig. 88 is only to be used on installations where the clamp cannot become dislodged from the beam
Installation: follow recommended set screw torque values per MSS-SP-69 and the Fig. 88 is only to be used on installations where the clamp cannot become dislodged from the beam
• 60 in-lbs torque
60 in-lbs torque