Anvil® 0500009097 FIG 92 Universal Standard Throat C-Clamp, 3/8 in Rod, 500 lb Top/250 lb Bottom Load, Ductile Iron, Zinc Plated

09900574 MFG #: 0500009097
  • Type: Type C, Universal Standard Throat
  • Series: FIG 92
  • Rod Size: 3/8
  • Load Capacity: 500, 500 lb Top/250 lb Bottom
  • Material: Ductile Iron
  • Finish: Electro-Galvanized, Zinc Plated
  • Specifications: 60 in-lbs Torque
  • Temperature Rating: 450
Anvil® C-Clamp, Universal Standard Throat, Series: FIG 92, 3/8 in Rod, 500 lb Top/250 lb Bottom, 60 in-lbs Torque, Ductile Iron, Zinc Plated, 450 deg F
  • They may be attached to horizontal flanges of structural members in either the top beam or
  • They may be attached
  • Secured in place by a cup-pointed set screw tightened against the flange, a jam nut is pro
  • Secured in place by
  • Thru tapping of the body casting permits extended adjustment of the threaded rod
  • Thru tapping of the
  • Can be used with Fig 89X retaining clip for seismic applications
  • Can be used with Fig
  • Recommended for use under roof installations with bar joist type construction, or for atta
  • Standard throat universal c-type clamp
  • Standard throat univ
  • Ductile iron, hardened steel cup point set screw and locknut
  • Ductile iron, harden
They may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions
They may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions
Secured in place by a cup-pointed set screw tightened against the flange, a jam nut is provided for tightening the set screw against the body casting
Secured in place by a cup-pointed set screw tightened against the flange, a jam nut is provided for tightening the set screw against the body casting
Thru tapping of the body casting permits extended adjustment of the threaded rod
Thru tapping of the body casting permits extended adjustment of the threaded rod
Can be used with Fig 89X retaining clip for seismic applications
Can be used with Fig 89X retaining clip for seismic applications
Recommended for use under roof installations with bar joist type construction, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 3/4 in
Standard throat universal c-type clamp
Standard throat universal c-type clamp
Ductile iron, hardened steel cup point set screw and locknut
Ductile iron, hardened steel cup point set screw and locknut