/ Each
Anvil® 0500359500 FIG 260 Adjustable Clevis Hanger, 1/2 to 3/4 in Pipe, 3/8 in Rod, 610 lb Load, Carbon Steel, Galvanized
Part #09900653
Legacy #09900653
MFG #0500359500
Anvil® Clevis Hanger, Adjustable, Series: FIG 260, 1/2 to 3/4 in Pipe, 3/8 in Rod, 610 lb, Carbon Steel, Galvanized, 450 deg F
/ Each
Product Attributes
Brand : Anvil®
Type : Adjustable
Series : FIG 260
Pipe Size : 1/2 to 3/4
Rod Size : 3/8
Load Capacity : 610
Product Documents
Product Features
- Hanger load nut above clevis must be tightened securely to assure proper hanger performance
- Hanger load nut above clevis must be tightened securely to assure proper hanger performance
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
- Tighten upper nut after adjustment
- Tighten upper nut after adjustment
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
- Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
- Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane