Anvil® 0500359518 FIG 260 Adjustable Clevis Hanger, 1 in Pipe, 3/8 in Rod, 730 lb Load, Carbon Steel, Hot Dipped Galvanized

09940110 MFG #: 0500359518
  • Brand: Anvil®
  • Type: Adjustable
  • Series: FIG 260
  • Pipe Size: 1
  • Rod Size: 3/8
  • Load Capacity: 730
  • Material: Carbon Steel
  • Finish: Hot Dipped Galvanized
  • Temperature Rating: 450
Anvil® Clevis Hanger, Adjustable, Series: FIG 260, 1 in Pipe, 3/8 in Rod, 730 lb, Carbon Steel, Hot Dipped Galvanized, 450 deg F
  • Hanger load nut above clevis must be tightened securely to assure proper hanger performanc
  • Hanger load nut abov
  • Vertical adjustment
  • Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varyin
  • Tighten upper nut af
  • Tighten upper nut after adjustment
  • Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, th
  • Design has yoke on o
  • Sizes 5 in and up ha
  • Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis r
  • Hot-dip galvanized w
  • Hot-dip galvanized with zinc plated bolts and nuts
Hanger load nut above clevis must be tightened securely to assure proper hanger performance
• Hanger load nut above clevis must be tightened securely to assure proper hanger performance
• Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
• Tighten upper nut after adjustment
Tighten upper nut after adjustment
Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
• Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
• Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
• Hot-dip galvanized with zinc plated bolts and nuts
Hot-dip galvanized with zinc plated bolts and nuts