/ Each
Norton® Neon® 66623399017 R766 Arbor Thread Quick-Trim Standard Density Coated Abrasive Flap Disc, 7 in Dia, P60 Grit, Coarse Grade, Aluminum Oxide/Zirconia Alumina Abrasive, Type 27 Flat Disc
Part #NORTON 66623399017
Legacy #15600189
MFG #66623399017
Norton® Neon® Coated Abrasive Flap Disc, Arbor Thread Quick-Trim Standard Density, Series: R766, 7 in Disc Dia, 5/8-11 Center Hole Thread Size, P60 Grit, Coarse Grade, Aluminum Oxide/Zirconia Alumina Abrasive, Type 27 Flat Disc, Plastic Backing, 8600 rpm Maximum, Black/Blue/Green
/ Each
Product Attributes
Brand : Norton®
Type : Arbor Thread Quick-Trim Standard Density, Quick Trim Standard Density
Series : R766
Disc Diameter : 7
Center Hole Thread Size : 5/8-11
Grit : P60
Product Documents
Product Features
- Alternating zirconia alumina (blue) and aluminum oxide (black) flaps provides higher performance than aluminum oxide while retaining an economical price
- Alternating zirconia alumina (blue) and aluminum oxide (black) flaps provides higher performance than aluminum oxide while retaining an economical price
- • Used primarily on flat surfaces
- Type 27 flat discs are designed to be used at a 0 to 15 deg angle on flat surfaces for blending and smooth finishing
- Type 27 flat discs are designed to be used at a 0 to 15 deg angle on flat surfaces for blending and smooth finishing
- • Grind at 0 to 15 deg flatter angles
- Flexible plastic backing plate adds conformability and is quickly, easily trimmable
- Flexible plastic backing plate adds conformability and is quickly, easily trimmable
- • Alternating aluminum oxide (green) and zirconia alumina (blue) flaps
- Polyester cotton backing combination for good cut rate and finishing
- Polyester cotton backing combination for good cut rate and finishing
- • New resin system and Y-weight polyester flaps
- Good choice for soft metals to hard to grind stainless and carbon steel
- Good choice for soft metals to hard to grind stainless and carbon steel, medium girt cleaning, detailing and finishing
- • New grain coating
- Angled, polyester/cotton flaps provide greater surface contact and are the best choice when speed of job completion and stock removal are primary considerations, may be used on contour and edge work
- • Ideal when purchasing criteria is a good-performing, economically priced, general purpose disc
- Their fiberglass/resin backing plates are the most popular plate configuration due to high strength, light weight, ability to absorb vibration and operator comfort
- • Improved base adhesion and 30%+ improvement in life over key competitors' aluminum oxide flap discs
- • Stand up on light to moderately demanding applications
- • Longer life and faster cut rate
- • High strength, lightweight, absorbs vibration
- • New industry standard for trimmability
- • Good tier
- • The best choice for blending and smooth finishing