$ / Box of 100
DeWALT® 7404SD1 SD1 Expansion Wedge Anchor, 1/4 in Dia, 3-1/4 in OAL, 2-1/4 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7404SD1-PWR
Legacy #08317051
MFG #7404SD1
DeWALT®, 7404SD1, Wedge Anchor, Expansion, Series: SD1, 1/4 in Diameter, 3-1/4 in Overall Length, 2-1/4 in Thread Length, Carbon Steel, Zinc Plated, 1-1/8 in Minimum Embedment Depth, 1/4 in Drill, 1/4-20 Thread, Hex Head, UNC Thread, 1-7/8 in Maximum Work Thickness, 1255 lb Shear Strength, 1435 lb Tensile Strength
$ / Box of 100
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : Strong-Bolt® 2
Diameter : 1/4
Overall Length : 3-1/4
Thread Length : 2-1/4, 2-7/16
Product Documents
Product Features
- Consistent performance in high and low strength concrete
- Consistent performance in high and low strength concrete
- Tri-segmented clip, each segment adjusts independently, increasing follow-up expansion, should the hole increase in size as a result of a crack
- Nominal drill bit size is the same as the anchor diameter
- Nominal drill bit size is the same as the anchor diameter
- Dual embossments on each clip segment, enable the clip to undercut into the concrete, thereby increasing follow-up expansion should a crack occur
- Anchor can be installed through standard fixture holes
- Anchor can be installed through standard fixture holes
- Standard (ANSI) fractional anchor, The Strong-Bolt 2 is sized to fit most fixtures and it installs with common drill bit sizes and tools
- Anchor design allows for follow-up expansion after setting under tensile loading
- Standard fractional sizes fits standard fixtures and installs with common drill bit and tool sizes
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel stud with special alloy clip
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Carbon steel ASTM A563 grade A nut
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Carbon steel ASTM F844 washer
- Carbon steel ASTM A568 clip
- 5/16 in Dia baseplate clearance hole
- 4 ft-lb installation torque
- 1-7/8 in D minimum hole
- 56000 psi yield strength
- 5/16 in minimum fixture hole