$ / Box of 50
DeWALT® 7412SD1-PWR SD1 Expansion Wedge Anchor, 3/8 in Dia, 2-3/4 in OAL, 1-3/8 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7412SD1-PWR
Legacy #08337234
MFG #7412SD1-PWR
DeWALT®, 7412SD1-PWR, Expansion Wedge Anchor, Series: SD1, 3/8 in Diameter, 2-3/4 in Overall Length, 1-3/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, 3/8-16 Thread, Threaded Stud Head, UNC Thread, 3/4 in Maximum Work Thickness, 2540 lb Shear Strength, 3100 lb Tensile Strength
$ / Box of 50
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : SD1, Wedge-All®
Diameter : 3/8
Overall Length : 2-3/4
Thread Length : 1-3/8, 1-5/8
Product Documents
Product Features
- • Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performance in high and low strength concrete
- Consistent performance in high and low strength concrete
- • One-piece, wrap-around clip ensures uniform holding capacity
- Nominal drill bit size is the same as the anchor diameter
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- • Threaded end is chamfered for ease of starting nut
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- • Available in a wide range of diameters and lengths
- Anchor design allows for follow-up expansion after setting under tensile loading
- Nominal drill bit diameter same as Anchor diameter
- • Carbon steel ASTM A563 grade A nut
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and identifying marking stamped on head of each Anchor
- • The minimum concrete thickness is 1-1/2 times the embedment depth
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi, 3100 lb tensile strength when embedded in 4000 psi normal-weight concrete
- • The allowable loads are based on a safety factor of 4
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- • 7/16 in minimum fixture hole
- • 30 ft-lb installation torque
- • 1560 lb at 2000 psi/2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555 lb at 3000 psi, 720 at 4000 psi allowable tension load for concrete
- • 2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear load for concrete
- • Anchor body material meets minimum 70000 psi tensile strength