DeWALT® 7413SD1-PWR SD1 Expansion Wedge Anchor, 3/8 in Dia, 3 in OAL, 1-5/8 in L Thread, Carbon Steel, Zinc Plated
08337300
MFG #: 7413SD1-PWR
$0.00
/ Box of 50
In Stock
- Type: Expansion
- Series: SD1, Wedge-All®
- Diameter: 3/8
- Overall Length: 3
- Thread Length: 1-5/8, 1-7/8
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 1-3/4, 1-5/8
- Head Size: 9/16
- Drill Size: 3/8
- Head Type: Hex, Threaded Stud
- Thread Size: 3/8-16
- Head Style: Hex
- Thread Type: UNC
- Maximum Work Thickness: 1
- Shear Strength: 2540, 570
- Tensile Strength: 261, 2685, 3100
DeWALT®, 7413SD1-PWR, Expansion Wedge Anchor, Series: SD1, 3/8 in Diameter, 3 in Overall Length, 1-5/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, 3/8-16 Thread, Threaded Stud Head, UNC Thread, 1 in Maximum Work Thickness, 2540 lb Shear Strength, 3100 lb Tensile Strength
- Consistent performan
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Anchor can be instal
- Nominal drill bit si
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor design allows
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Nominal drill bit di
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide range of diameters and lengths
- Length ID code and i
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel ASTM A563 grade A nut
- Ultimate load capaci
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Normal weight concre
- The allowable loads are based on a safety factor of 4
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- 7/16 in minimum fixture hole
- 30 ft-lb installation torque
- 1560 lb at 2000 psi/2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555
- 2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear
- Anchor body material meets minimum 70000 psi tensile strength
Consistent performance in high and low strength concrete
Consistent performance in high and low strength concrete
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Anchor can be installed through standard fixture holes
Nominal drill bit size is the same as the anchor diameter
Nominal drill bit size is the same as the anchor diameter
One-piece, wrap-around clip ensures uniform holding capacity
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Anchor can be installed through standard fixture holes
Threaded end is chamfered for ease of starting nut
Nominal drill bit diameter same as Anchor diameter
Anchor design allows for follow-up expansion after setting under tensile loading
Available in a wide range of diameters and lengths
Length ID code and identifying marking stamped on head of each Anchor
Length ID code and identifying marking stamped on head of each anchor
Carbon steel ASTM A563 grade A nut
Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi, 3100 lb tensile strength when embedded in 4000 psi normal-weight concrete
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
The minimum concrete thickness is 1-1/2 times the embedment depth
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
The allowable loads are based on a safety factor of 4
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
7/16 in minimum fixture hole
30 ft-lb installation torque
1560 lb at 2000 psi/2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555 lb at 3000 psi, 720 at 4000 psi allowable tension load for concrete
2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear load for concrete
Anchor body material meets minimum 70000 psi tensile strength