/ Box of 50
DeWALT® 7420SD1-PWR SD1 Expansion Wedge Anchor, 1/2 in Dia, 2-3/4 in OAL, 1 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7420SD1-PWR
Legacy #08317046
MFG #7420SD1-PWR
DeWALT®, 7420SD1-PWR, Expansion Wedge Anchor, Series: SD1, 1/2 in Diameter, 2-3/4 in Overall Length, 1 in Thread Length, Carbon Steel, Zinc Plated, 2-1/4 in Minimum Embedment Depth, 1/2 in Drill, 1/2-13 Thread, Threaded Stud Head, UNC Thread, 4195 lb Shear Strength, 4800 lb Tensile Strength
/ Box of 50
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : SD1, Wedge-All®
Diameter : 1/2
Overall Length : 2-3/4
Thread Length : 1, 1-5/16
Product Documents
Product Features
- Consistent performance in high and low strength concrete
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performance in high and low strength concrete
- Anchor can be installed through standard fixture holes
- Anchor can be installed through standard fixture holes
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Nominal drill bit size is the same as the anchor diameter
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Threaded end is chamfered for ease of starting nut
- Anchor can be installed through standard fixture holes
- Nominal drill bit diameter same as Anchor diameter
- Nominal drill bit diameter same as Anchor diameter
- Available in a wide range of diameters and lengths
- Anchor design allows for follow-up expansion after setting under tensile loading
- Length ID code and identifying marking stamped on head of each Anchor
- Length ID code and identifying marking stamped on head of each Anchor
- Carbon steel ASTM A563 grade A nut
- Length ID code and identifying marking stamped on head of each anchor
- Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi, 3100 lb tensile strength when embedded in 4000 psi normal-weight concrete
- Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi, 3100 lb tensile strength when embedded in 4000 psi normal-weight concrete
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- The allowable loads are based on a safety factor of 4
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- 9/16 in minimum fixture hole
- 60 ft-lb installation torque
- 3280 lb at 2000 psi/5280 lb at 4000 psi ultimate tension loads and 820 lb at 2000 psi, 1360 lb at 4000 allowable tension loads for concrete
- 6560 lb at 2000 psi ultimate and 1345 lb at 2000 psi, 1485 lb at 3000 psi, 1625 lb at 4000 psi allowable shear loads for concrete
- Anchor body material meets minimum 70000 psi tensile strength