$ / Box of 25
DeWALT® 7430SD1-PWR SD1 Expansion Wedge Anchor, 5/8 in Dia, 3-1/2 in OAL, 1-1/2 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7430SD1-PWR
Legacy #08317058
MFG #7430SD1-PWR
DeWALT®, 7430SD1-PWR, Expansion Wedge Anchor, Series: SD1, 5/8 in Diameter, 3-1/2 in Overall Length, 1-1/2 in Thread Length, Carbon Steel, Zinc Plated, 2-3/4 in Minimum Embedment Depth, 5/8 in Drill, 5/8-11 Thread, Threaded Stud Head, UNC Thread, 1/8 in Maximum Work Thickness, 6815 lb Shear Strength, 6285 lb Tensile Strength
$ / Box of 25
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : SD1, Wedge-All®
Diameter : 5/8, 5/8 in
Overall Length : 3-1/2, 3-1/2 in
Thread Length : 1-1/2, 1-1/2 in, 1-7/8
Product Documents
Product Features
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performance in high and low strength concrete
- Anchor can be installed through standard fixture holes
- One-piece, wrap-around clip ensures uniform holding capacity
- Nominal drill bit diameter same as anchor diameter
- Anchor design allows for follow-up expansion after setting under tensile loading
- Threaded end is chamfered for ease of starting nut
- Anchor can be installed through standard fixture holes
- Nominal drill bit diameter same as Anchor diameter
- Available in a wide range of diameters and lengths
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and identifying marking stamped on head of each Anchor
- Carbon steel ASTM A563 grade A nut
- Anchor design allows for follow-up expansion after setting under tensile loading
- Allowable load capacity - 1240 lb tensile strength when embedded in 2500 psi, 1360 lb tensile strength when embedded in 3000 psi, 1570 lb tensile strength when embedded in 4000 psi normal-weight concrete
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads are based on a safety factor of 4
- 35/64 in nut height
- 11/16 in minimum fixture hole
- 15/16 in wrench
- 80 ft-lbf installation torque
- 90 ft-lb installation torque
- 80 ft-lbf installation torque
- 11/16 in fixture clearance hole
- 11/16 in fixture clearance hole
- 4520 lb at 2000 psi/8600 lb at 4000 psi ultimate tension loads and 1130 lb at 2000 psi, 1640 lb at 3000 psi, 2150 lb at 4000 psi for concrete
- 8720 lb at 2000 psi ultimate shear loads and 1620 lb at 2000 psi, 1900 lb at 3000 psi, 2180 lb at 4000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength