/ Box of 25
Simpson Strong-Tie® WA62412 Wedge-All® Wedge Anchor, 5/8 in Dia, 4-1/2 in OAL, 2-7/8 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7432SD1-PWR
Legacy #08317059
MFG #WA62412
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 5/8 in Dia, 4-1/2 in Overall Length, 2-7/8 in Thread Length, Carbon Steel, Zinc Plated, 2-3/4 in Minimum Embedment Depth, 5/8 in Drill, 15/16 in Head, 1699 lb Shear Strength, 120 lb Tensile
/ Box of 25
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : Wedge-All®
Diameter : 5/8
Overall Length : 4-1/2
Thread Length : 2-1/2, 2-7/8
Product Documents
Product Features
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide range of diameters and lengths
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel ASTM A563 grade A nut
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- The allowable loads are based on a safety factor of 4
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- 11/16 in minimum fixture hole
- 90 ft-lb installation torque
- 4520 lb at 2000 psi/8600 lb at 4000 psi ultimate tension loads and 1130 lb at 2000 psi, 1640 lb at 3000 psi, 2150 lb at 4000 psi for concrete
- 8720 lb at 2000 psi ultimate shear loads and 1620 lb at 2000 psi, 1900 lb at 3000 psi, 2180 lb at 4000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength