/ Box of 25
DeWALT® 7433SD1 SD1 Expansion Wedge Anchor, 5/8 in Dia, 5 in OAL, 3 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7433SD1-PWR
Legacy #08317060
MFG #7433SD1
DeWALT®, 7433SD1, Wedge Anchor, Expansion, Series: SD1, 5/8 in Diameter, 5 in Overall Length, 3 in Thread Length, Carbon Steel, Zinc Plated, 2-3/4 in Minimum Embedment Depth, 5/8 in Drill, 5/8-11 Thread, Hex Head, UNC Thread, 1-5/8 in Maximum Work Thickness, 6815 lb Shear Strength, 5440 lb Tensile Strength
/ Box of 25
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : Wedge-All®
Diameter : 5/8
Overall Length : 5
Thread Length : 3, 3-3/8
Product Documents
Product Features
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performance in high and low strength concrete
- Consistent performance in high and low strength concrete
- One-piece, wrap-around clip ensures uniform holding capacity
- Nominal drill bit size is the same as the anchor diameter
- Nominal drill bit size is the same as the anchor diameter
- Threaded end is chamfered for ease of starting nut
- Anchor can be installed through standard fixture holes
- Anchor can be installed through standard fixture holes
- Available in a wide range of diameters and lengths
- Anchor design allows for follow-up expansion after setting under tensile loading
- Carbon steel ASTM A563 grade A nut
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and identifying marking stamped on head of each anchor
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- The allowable loads are based on a safety factor of 4
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- 11/16 in minimum fixture hole
- 90 ft-lb installation torque
- 4520 lb at 2000 psi/8600 lb at 4000 psi ultimate tension loads and 1130 lb at 2000 psi, 1640 lb at 3000 psi, 2150 lb at 4000 psi for concrete
- 8720 lb at 2000 psi ultimate shear loads and 1620 lb at 2000 psi, 1900 lb at 3000 psi, 2180 lb at 4000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength