DeWALT® 7441SD1-PWR SD1 Expansion Wedge Anchor, 3/4 in Dia, 4-3/4 in OAL, 2-1/4 in L Thread, Carbon Steel, Zinc Plated
08317054
MFG #: 7441SD1-PWR
$0.00
/ Box of 20
In Stock
- Type: Expansion
- Series: SD1
- Diameter: 3/4
- Overall Length: 4-3/4
- Thread Length: 2-1/4
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 3-3/8
- Drill Size: 3/4
- Head Type: Hex, Threaded Stud
- Thread Size: 3/4-10
- Head Style: Hex
- Thread Type: UNC
- Maximum Work Thickness: 5/8
- Shear Strength: 12580, 12685
- Tensile Strength: 7860, 9075
DeWALT®, 7441SD1-PWR, Expansion Wedge Anchor, Series: SD1, 3/4 in Diameter, 4-3/4 in Overall Length, 2-1/4 in Thread Length, Carbon Steel, Zinc Plated, 3-3/8 in Minimum Embedment Depth, 3/4 in Drill, 3/4-10 Thread, Threaded Stud Head, UNC Thread, 5/8 in Maximum Work Thickness, 12580 lb Shear Strength, 9075 lb Tensile Strength
- Consistent performance in high and low strength concrete
- Consistent performan
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be instal
- Nominal drill bit si
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor can be installed through standard fixture holes
- Anchor design allows
- Threaded end is chamfered for ease of starting nut
- Anchor design allows for follow-up expansion after setting under tensile loading
- Nominal drill bit di
- Available in a wide range of diameters and lengths
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and i
- Carbon steel ASTM A563 grade A nut
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- Normal weight concre
- The allowable loads are based on a safety factor of 4
- 7/8 in minimum fixture hole
- 150 ft-lb installation torque
- 6760 lb at 2000 psi, 9960 lb at 4000 psi ultimate tension loads and 1690 lb at 2000 psi, 2
- 11360 lb at 2000 psi ultimate shear loads and 2840 lb at 2000/3000/4000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength
Consistent performance in high and low strength concrete
Consistent performance in high and low strength concrete
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Nominal drill bit size is the same as the anchor diameter
Anchor can be installed through standard fixture holes
Nominal drill bit size is the same as the anchor diameter
One-piece, wrap-around clip ensures uniform holding capacity
Anchor can be installed through standard fixture holes
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Threaded end is chamfered for ease of starting nut
Anchor design allows for follow-up expansion after setting under tensile loading
Nominal drill bit diameter same as Anchor diameter
Available in a wide range of diameters and lengths
Length ID code and identifying marking stamped on head of each anchor
Length ID code and identifying marking stamped on head of each Anchor
Carbon steel ASTM A563 grade A nut
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
The minimum concrete thickness is 1-1/2 times the embedment depth
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
The allowable loads are based on a safety factor of 4
7/8 in minimum fixture hole
150 ft-lb installation torque
6760 lb at 2000 psi, 9960 lb at 4000 psi ultimate tension loads and 1690 lb at 2000 psi, 2090 lb at 3000 psi, 2490 lb 4000 allowable tension load psi for concrete
11360 lb at 2000 psi ultimate shear loads and 2840 lb at 2000/3000/4000 psi for concrete
Anchor body material meets minimum 70000 psi tensile strength