$65.37 / Box of 10
In Stock
DeWALT® 7448SD1-PWR SD1 Expansion Wedge Anchor, 3/4 in Dia, 8-1/2 in OAL, 6 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7448SD1-PWR
Legacy #08396204
MFG #7448SD1-PWR
DeWALT®, 7448SD1-PWR, Expansion Wedge Anchor, Series: SD1, 3/4 in Diameter, 8-1/2 in Overall Length, 6 in Thread Length, Carbon Steel, Zinc Plated, 3-3/8 in Minimum Embedment Depth, 3/4 in Drill, 3/4-10 Thread, Threaded Stud Head, UNC Thread, 4-3/8 in Maximum Work Thickness, 12580 lb Shear Strength, 9075 lb Tensile Strength
$65.37 / Box of 10
In Stock
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : SD1
Diameter : 3/4
Overall Length : 8-1/2
Thread Length : 6
Product Documents
Product Features
- Consistent performance in high and low strength concrete
- Consistent performance in high and low strength concrete
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Anchor can be installed through standard fixture holes
- Anchor can be installed through standard fixture holes
- Nominal drill bit size is the same as the anchor diameter
- Nominal drill bit size is the same as the anchor diameter
- • One-piece, wrap-around clip ensures uniform holding capacity
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Anchor can be installed through standard fixture holes
- • Threaded end is chamfered for ease of starting nut
- Threaded end is chamfered for ease of starting nut
- Nominal drill bit diameter same as Anchor diameter
- Nominal drill bit diameter same as Anchor diameter
- Anchor design allows for follow-up expansion after setting under tensile loading
- • Available in a wide range of diameters and lengths
- Available in a wide range of diameters and lengths
- Length ID code and identifying marking stamped on head of each Anchor
- Length ID code and identifying marking stamped on head of each Anchor
- Length ID code and identifying marking stamped on head of each anchor
- • Carbon steel ASTM A563 grade A nut
- Carbon steel ASTM A563 grade A nut
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- • The minimum concrete thickness is 1-1/2 times the embedment depth
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- • The allowable loads are based on a safety factor of 4
- The allowable loads are based on a safety factor of 4
- Anchor body material meets minimum 70000 psi tensile strength