/ Box of 10
Simpson Strong-Tie® WA16000 Wedge-All® Wedge Anchor, 1 in Dia, 6 in OAL, 2-1/4 in L Thread, Carbon Steel, Zinc Plated
Part #DEWALT 7461SD1-PWR
Legacy #08317052
MFG #WA16000
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 1 in Dia, 6 in Overall Length, 2-1/4 in Thread Length, Carbon Steel, Zinc Plated, 4-1/2 in Minimum Embedment Depth, 1 in Drill, 1-1/2 in Head, 1156 lb Shear Strength, 2440 lb Tensile
/ Box of 10
Product Attributes
Brand : DeWALT®
Type : Expansion
Series : Wedge-All®
Diameter : 1
Overall Length : 6
Thread Length : 2-1/4, 2-3/8
Product Documents
Product Features
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide range of diameters and lengths
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel ASTM A563 grade A nut
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- The allowable loads are based on a safety factor of 4
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- 1-1/8 in minimum fixture hole
- 300 ft-lb installation torque
- 15400 lb at 2000 psi/15680 lb at 4000 psi ultimate tension loads and 3850 lb at 2000 psi, 3885 lb at 3000 psi, 3920 lb at 4000 psi for concrete
- 22519 lb ultimate and 5730 lb allowable shear loads at 2000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength