Simpson Strong-Tie® WA373344SS Wedge-All® Wedge Anchor, 3/8 in Dia, 3-3/4 in OAL, 2-5/8 in L Thread, 303/304 Stainless Steel
DEWALT 07315-PWR
MFG #: WA373344SS
$0.00
/ Box of 50
In Stock
- Series: Wedge-All®
- Diameter: 3/8
- Overall Length: 3-3/4
- Thread Length: 2-5/8
- Material: 303/304 Stainless Steel
- Minimum Embedment Depth: 1-3/4
- Head Size: 9/16
- Drill Size: 3/8
- Shear Strength: 96
- Tensile Strength: 500
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 3/8 in Dia, 3-3/4 in Overall Length, 2-5/8 in Thread Length, 303/304 Stainless Steel, 1-3/4 in Minimum Embedment Depth, 3/8 in Drill, 9/16 in Head, 96 lb Shear Strength, 500 lb Tensile
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- 18-8 stainless steel nut/washer/clip
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads are based on a safety factor of 4
- 7/16 in minimum fixture hole
- 30 ft-lb installation torque
- 2280 lb ultimate and 570 lb allowable shear strength
- 350 lb at 2000 psi anf 600 lb at 4000 psi allowable tension load
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
18-8 stainless steel nut/washer/clip
The minimum concrete thickness is 1-1/2 times the embedment depth
The allowable loads are based on a safety factor of 4
7/16 in minimum fixture hole
30 ft-lb installation torque
2280 lb ultimate and 570 lb allowable shear strength
350 lb at 2000 psi anf 600 lb at 4000 psi allowable tension load