$3.74 / Each
In Stock
SPF/Anvil™ 0560009193 FIG 93 Universal Wide Throat C-Clamp, 3/8 in Rod, 1-1/4 in THK Flange, 500 lb Top/250 lb Bottom lb Load, Ductile Iron, Hot Dipped Galvanized
Part #09900750
Legacy #09900750
MFG #0560009193
SPF/Anvil™ C-Clamp, Universal Wide Throat, Series: FIG 93, 3/8 in Rod, 1-1/4 in Flange Thickness, 500 lb Top/250 lb Bottom lb, 60 in-lbs Torque, Ductile Iron, Hot Dipped Galvanized, 450 deg F
$3.74 / Each
In Stock
Product Attributes
Brand : SPF/Anvil™
Type : Type C, Universal Wide Throat
Series : FIG 93
Rod Size : 3/8
Flange Thickness : 1-1/4
Load Capacity : 500 lb Top/250 lb Bottom, 500/250
Product Documents
Product Features
- Internationally Manufactured. Thru tapping of the body casting permits extended adjustment of the threaded rod.
- Attached to horizontal flanges of structural members in either the top beam or bottom beam positions
- Attached to horizontal flanges of structural members in either the top beam or bottom beam positions
- Secured in place by a cup-pointed set screw tightened against the flange
- Secured in place by a cup-pointed set screw tightened against the flange
- A jam nut is provided for tightening the set screw against the body casting
- A jam nut is provided for tightening the set screw against the body casting
- Thru tapping of the body casting permits extended adjustment of the threaded rod
- Thru tapping of the body casting permits extended adjustment of the threaded rod
- Wider throat for attaching to flange with up to 1-1/4 in THK
- Wider throat for attaching to flange with up to 1-1/4 in THK
- Recommended for use under roof installations with bar joist type constructions, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1-1/2 in
- Recommended for use under roof installations with bar joist type constructions, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1-1/2 in
- Hardened steel cup point set screw and locknut
- Hardened steel cup point set screw and locknut