Master STAGES™ WHAMEX/5G Whamex™ Machine Tool Sump/System Cleaner, 5 gal Pail, Liquid, Yellow, Mild
12340001
MFG #: WHAMEX/5G
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Series: Whamex™
- Container Size: 5
- Container Type: Pail
- Form: Liquid
- Color: Yellow
- Odor/Scent: Mild
- Specific Gravity: 1.026 to 1.134
Master STAGES™ Machine Tool Sump/System Cleaner, Series: Whamex™, 5 gal, Pail, Liquid, Yellow, Mild, 1.026 to 1.134 Specific Gravity
- A very specialized formula that draws on Master Chemical's knowledge of coolant formulatio
- A very specialized f
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to
- Quickly breaks down
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Very hard water tole
- Environmental approvals are simplified because Whamex contains no nitrites, phosphates, ba
- Environmental approv
- When used as directed below, this product is compatible with TRIM® brand synthetic, semisy
- When used as directe
- Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or
- Will remove heavy so
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
- Short-term corrosion
- PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex™ into th
- After the Whamex™ has circulated for at least 24 hours, pump out the sump and remove all c
- After the Whamex™ ha
- Spray down the machine with a 10%-15% Whamex™ and water solution using The Whammer™ or a g
- 10.6 at 2% Working Solution, 10.5 at 5% Working Solution pH range
- 10.6 at 2% Working S
- 215 deg F flash point
- 215 deg F flash poin
- 120 deg F temperature
- 120 deg F temperatur
- 12 Months shelf life
A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
Very hard water tolerant allowing it to be effective in raw water or used coolant
Very hard water tolerant allowing it to be effective in raw water or used coolant
Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex™ into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES™ DF1 or TRIM® TC 239, available during this process
After the Whamex™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
After the Whamex™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
Spray down the machine with a 10%-15% Whamex™ and water solution using The Whammer™ or a general-purpose garden sprayer. Scrub out the chips, sludge, and any other residues from all interior, exterior, tool changer areas including high-pressure sumps and filter canisters
10.6 at 2% Working Solution, 10.5 at 5% Working Solution pH range
10.6 at 2% Working Solution, 10.5 at 5% Working Solution pH range
215 deg F flash point
215 deg F flash point
120 deg F temperature
120 deg F temperature
12 Months shelf life