Simpson Strong-Tie® WA504144SS Wedge-All® Wedge Anchor, 1/2 in Dia, 4-1/4 in OAL, 2-13/16 in L Thread, 303/304 Stainless Steel
08350414
MFG #: WA504144SS
$0.00
/ Box of 25
In Stock
- Series: Wedge-All®
- Diameter: 1/2, 1/2 in
- Overall Length: 4-1/4, 4-1/4 in
- Thread Length: 2-13/16, 2-13/16 in
- Material: 303/304 Stainless Steel
- Minimum Embedment Depth: 2-1/4, 2-1/4 in
- Head Size: 3/4, 3/4 in
- Drill Size: 1/2, 1/2 in
- Shear Strength: 6560, 6560 lb
- Tensile Strength: 740, 740 lb
Simpson Strong-Tie® Wedge Anchor, Series: Wedge-All®, 1/2 in Dia, 4-1/4 in Overall Length, 2-13/16 in Thread Length, 303/304 Stainless Steel, 2-1/4 in Minimum Embedment Depth, 1/2 in Drill, 3/4 in Head, 6560 lb Shear Strength, 740 lb Tensile
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- 18-8 stainless steel nut/washer/clip
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads are based on a safety factor of 4
- 9/16 in minimum fixture hole
- 60 ft-lb installation torque
- 6560 ultimate and 1345 lb allowable shear strength
- 740 lb at 2000 psi and 1190 lb at 4000 psi allowable tension load
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
18-8 stainless steel nut/washer/clip
The minimum concrete thickness is 1-1/2 times the embedment depth
The allowable loads are based on a safety factor of 4
9/16 in minimum fixture hole
60 ft-lb installation torque
6560 ultimate and 1345 lb allowable shear strength
740 lb at 2000 psi and 1190 lb at 4000 psi allowable tension load