TPI F3F5115CA1L 5100 3-Phase Fan Forced Standard Unit Heater, 51.2 Btu/hr Capacity, 208 VAC, 15 kW Power Rating
07000332
MFG #: F3F5115CA1L
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: 3-Phase Fan Forced Standard
- Series: 5100
- Capacity: 51.2
- Voltage Rating: 208
- Amperage Rating: 41.7
- Power Rating: 15
- Flow Rate: 1100
- Temperature Rating: 43
- Mounting Type: Wall
- Mounting Height: 11 ft Horizontal, 20 ft Vertical, 11 ft Horizontal/20 ft Vertical
- Material: Steel
- Finish: Powder Coated
- Dimensions: 21-1/2 in W x 6-1/2 in D x 28-11/16 in H, 28-11/16 in H x 21-1/2 in W x 6-1/2 in D
TPI Unit Heater, 3-Phase Fan Forced Standard, Series: 5100, 51.2 Btu/hr, 208 VAC, 41.7 A, 15 kW, 1100 cfm, 43 deg F, Wall Mount, 11 ft Horizontal/20 ft Vertical Mounting Height, Steel, Powder Coated, 21-1/2 in W x 6-1/2 in D x 28-11/16 in H
- Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing
- Copper clad steel sheath element with continuously brazed steel fins formed to allow side
- All units come equipped with automatic reset type limit controls to de-energize the heater
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors wit
- All motors mounted with rubber insulators to minimize vibration and noise
- Fan over-ride purges unit of residual heat at shutdown
- Louvers are individually adjustable for directional control of air flow up to 15 deg from
- Unit heaters can be mounted for horizontal or vertical discharge
- 24 V control voltage
Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
All motors mounted with rubber insulators to minimize vibration and noise
Fan over-ride purges unit of residual heat at shutdown
Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
Unit heaters can be mounted for horizontal or vertical discharge
24 V control voltage