Anvil® 0500009246 FIG 94 Wide Throat Top Beam C-Clamp With Lock Nut, 3/4 in Rod, 1600 lb Load, Ductile Iron, Black Oxide
00121736
MFG #: 0500009246
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Wide Throat
- Series: FIG 94
- Rod Size: 3/4
- Load Capacity: 1600
- Material: Ductile Iron
- Finish: Black, Black Oxide
- Specifications: 60 in-lbs Torque
- Dimensions: 3/8 in Set Screw
- Temperature Rating: 450
Anvil® Top Beam C-Clamp, Wide Throat, Series: FIG 94, 3/4 in Rod, 1600 lb, 60 in-lbs Torque, Ductile Iron, Black Oxide, 450 deg F
- Provides clamping to
- Provides clamping to bar joists which are directly under roof installations
- Provides for vertica
- Provides for vertical hanger rod installed offset from the edge of the beam flange
- Malleable iron body
- Malleable iron body assures full thread engagement of rod
- Size of clamp is det
- Size of clamp is determined by size of rod to be used
- Follow maximum recom
- Follow maximum recommended set screw torque values PEX MSS-SP-69
- Hardened steel cup p
- Hardened steel cup point set screw and locknut
- For use under roof i
- For use under roof installations with bar joist type construction, or for attachment to th
- 60 in-lb torque
Provides clamping to bar joists which are directly under roof installations
Provides clamping to bar joists which are directly under roof installations
Provides for vertical hanger rod installed offset from the edge of the beam flange
Provides for vertical hanger rod installed offset from the edge of the beam flange
Malleable iron body assures full thread engagement of rod
Malleable iron body assures full thread engagement of rod
Size of clamp is determined by size of rod to be used
Size of clamp is determined by size of rod to be used
Follow maximum recommended set screw torque values PEX MSS-SP-69
Follow maximum recommended set screw torque values PEX MSS-SP-69
Hardened steel cup point set screw and locknut
Hardened steel cup point set screw and locknut
For use under roof installations with bar joist type construction, or for attachment to the top flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joists or flange does not exceed 1-5/16 in
For use under roof installations with bar joist type construction, or for attachment to the top flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joists or flange does not exceed 1-5/16 in
• 60 in-lb torque