JET® 320036 Arm Radial, 2-1/2 to 5 hp, 230 VAC, 25 x 20-1/2 x 16-5/16 in Table

54334455 MFG #: 320036
  • Type: Arm Radial
  • Spindle Taper: MT-4
  • Spindle Speed: 44 to 1500
  • Number of Spindle Speeds: 12
  • Spindle to Column Distance: 13-3/4 to 46
  • Table Size: 25 x 20-1/2 x 16-5/16
  • Base Dimensions: 67-3/4 x 28 x 7
  • Column Diameter: 11-13/16
  • Horsepower: 2-1/2 to 5
  • Voltage Rating: 230
  • Dimensions: 80 x 39 x 89
JET® Drill Press, Arm Radial, MT-4 Spindle Taper, 44 to 1500 rpm Spindle Speed, 12 Spindle Speed, 13-3/4 to 46 in Spindle to Column Distance, 25 x 20-1/2 x 16-5/16 in Table, 67-3/4 x 28 x 7 in Base, 11-13/16 in Column Dia, 2-1/2 to 5 hp, 230 VAC, 80 x 39 x 89 in
  • Made of the finest quality, heat treated and ground nickel-chrome steel, giving extra stre
  • Spindle is made of the finest case hardened steel for extra strength and wear
  • Supported by double row taper roller and thrust ball bearings at the nose with thrust and
  • Spindle is built to withstand exceptionally heavy drilling and boring loads and to insure
  • Push button controls are all reduced to 110 V
  • Electrical circuits are located in the built in control box at the rear of the arm- this k
  • Entire frame is made of meehanite and high tensile strength cast iron to handle the heavie
  • Arm raising safety device prevents arm from dropping
  • Counter balanced mechanism for spindle return
  • 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
  • Centralized control center, automatic tool ejector, built in work light, coolant pump, too
  • Independent arm manual clamping system, which locks and unlocks the head and column
  • 9-7/16 in quill travel with powerfeed engaged
  • 109-1/2 in machine height from floor
  • 19-3/8 - 54 in distance base to spindle
  • 1-1/2 in tapping capacity cast iron
  • 3-3/8 in boring capacity steel
  • 2-5/16 in drilling capacity cast iron
  • 1 in tapping capacity mild steel
  • 1-7/8 in drilling capacity mild steel, 35 in vertical arm travel, 3 IPR quill down feed ra
Made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
Spindle is made of the finest case hardened steel for extra strength and wear
Supported by double row taper roller and thrust ball bearings at the nose with thrust and radial axis bearings at the top
Spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
Push button controls are all reduced to 110 V
Electrical circuits are located in the built in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance
Entire frame is made of meehanite and high tensile strength cast iron to handle the heaviest of jobs
Arm raising safety device prevents arm from dropping
Counter balanced mechanism for spindle return
12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
Centralized control center, automatic tool ejector, built in work light, coolant pump, tool kit and box table
Independent arm manual clamping system, which locks and unlocks the head and column
9-7/16 in quill travel with powerfeed engaged
109-1/2 in machine height from floor
19-3/8 - 54 in distance base to spindle
1-1/2 in tapping capacity cast iron
3-3/8 in boring capacity steel
2-5/16 in drilling capacity cast iron
1 in tapping capacity mild steel
1-7/8 in drilling capacity mild steel, 35 in vertical arm travel, 3 IPR quill down feed rates, 1/8 in coolant pump motor, 4-3/4 in boring capacity cast iron, 35 in travel of head horizontal, 1 elevating motor, 9-7/8 in quill travel, 4 ft arm radia