JET® 321102AK Belt Drive With Stand, 13 in Swing Over Bed, 7-25/32 in Swing Over Cross Slide, 40 in Distance Between Centers, #5 Morse Taper Spindle, 2 hp
54335324
MFG #: 321102AK
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Belt Drive
- Swing Over Bed: 13
- Swing Over Cross Slide: 7-25/32
- Distance Between Centers: 40
- Bed Width: 7-3/8
- Tailstock Taper Size: #3 Morse Taper
- Spindle Size: #5 Morse Taper
- Spindle Speed: 60 to 1240
- Number of Spindle Speeds: 12
- Cross Travel: 6-5/16
- Tailstock Spindle Travel: 3-3/4
- Carriage Travel: 35
- Compound Travel: 2-11/16
- Maximum Cross Feed Rate per Revolution: 0.013
- Maximum Longitudinal Feed Rate per Revolution: 0.0374
- Horsepower: 2
- Voltage Rating: 230
- Dimensions: 71 in L x 32 in W x 45 in H
JET® Bench Lathe, Belt Drive, 13 in Swing Over Bed, 7-25/32 in Swing Over Cross Slide, 40 in Distance Between Centers, 7-3/8 in Bed Width, #3 Morse Taper Tailstock Taper, #5 Morse Taper Spindle, 60 to 1240 rpm Spindle Speed, 12 Spindle Speed, 6-5/16 in Cross Travel, 3-3/4 in Tailstock Spindle Travel, 35 in Carriage Travel, 2-11/16 in Compound Travel, 0.013 in Maximum Cross Feed Rate per Revolution, 0.0374 in Maximum Longitudinal Feed Rate per Revolution, 2 hp, 230 VAC, 71 in L x 32 in W x 45 in H
- One of the most popular JET lathes now comes with an enclosed gearbox as a standard featur
- Enclosed gearbox design provides smear, quiet operation
- Fast, easy speed changes
- Low voltage motor controls
- Helical cut headstock gears reduce noise
- Change gears allow metric threading
- Spindle is supported by precision tapered roller bearings
- V-way bed design is induction hardened and ground
- Gap bed section provided for larger diameter work
- Independent lead screw and feed rod
- T-slotted compound slide with four way tool post
- Carriage mounted spindle control lever
- Automatic feeding and threading are fully interlocked
- Feed selectors travel in grooved ways
- Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
- Oil pan included
- Tolerance test certificate included
- 6 in 3 jaw direct mount chuck with top reversing jaws, 8 in 4-jaw independent chuck, 12 in
- Four way tool post, steady and follow rest, metric change gear
- Centers and headstock center sleeves, threading dial, tool box with tools
One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
Enclosed gearbox design provides smear, quiet operation
Fast, easy speed changes
Low voltage motor controls
Helical cut headstock gears reduce noise
Change gears allow metric threading
Spindle is supported by precision tapered roller bearings
V-way bed design is induction hardened and ground
Gap bed section provided for larger diameter work
Independent lead screw and feed rod
T-slotted compound slide with four way tool post
Carriage mounted spindle control lever
Automatic feeding and threading are fully interlocked
Feed selectors travel in grooved ways
Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
Oil pan included
Tolerance test certificate included
6 in 3 jaw direct mount chuck with top reversing jaws, 8 in 4-jaw independent chuck, 12 in face plate
Four way tool post, steady and follow rest, metric change gear
Centers and headstock center sleeves, threading dial, tool box with tools