JET® 321139 ZX Series Large Spindle Bore With Newall DP700 Digital Readout, 16 in Swing Over Bed, 10 in Swing Over Cross Slide, 60 in Distance Between Centers, #7 Morse Taper Spindle, 7.5 hp
54334478
MFG #: 321139
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Large Spindle Bore
- Series: ZX Series
- Swing Over Bed: 16
- Swing Over Cross Slide: 10
- Distance Between Centers: 60
- Bed Width: 13-3/8
- Tailstock Taper Size: #4 Morse Taper
- Spindle Size: #7 Morse Taper
- Spindle Speed: 25 to 1800
- Number of Spindle Speeds: 12
- Cross Travel: 9
- Tailstock Spindle Travel: 5
- Carriage Travel: 55-9/16
- Compound Travel: 5-1/8
- Maximum Cross Feed Rate per Revolution: 0.0365
- Maximum Longitudinal Feed Rate per Revolution: 0.0913
- Horsepower: 7.5
- Voltage Rating: 230/460
- Dimensions: 115 in L x 44 in W x 66 in H
JET® Engine Lathe, Large Spindle Bore, Series: ZX Series, 16 in Swing Over Bed, 10 in Swing Over Cross Slide, 60 in Distance Between Centers, 13-3/8 in Bed Width, #4 Morse Taper Tailstock Taper, #7 Morse Taper Spindle, 25 to 1800 rpm Spindle Speed, 12 Spindle Speed, 9 in Cross Travel, 5 in Tailstock Spindle Travel, 55-9/16 in Carriage Travel, 5-1/8 in Compound Travel, 0.0365 in Maximum Cross Feed Rate per Revolution, 0.0913 in Maximum Longitudinal Feed Rate per Revolution, 7.5 hp, 230/460 VAC, 115 in L x 44 in W x 66 in H
- 3-1/8 in bore spindle is supported by two tapered and one ball bearings
- Chrome molybdenum headstock gears are hardened, ground and shaved
- Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears
- Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
- T-slotted compound slide featuring four way tool post
- One piece cast iron base absorbs vibration allowing heavier cuts
- High quality ANSI class 50 wear resistant cast iron bed ways are hardened and ground
- Removable gap allows large diameter work
- Five position automatic carriage stop increases productivity
- Attractive chrome levers, dials and knobs complete this impressive package
- Meehanite® castings
- 10 in 3-jaw scroll chuck with top reversing jaws
- 12 in 4-jaw independent chuck
- 12 in face plate
- Four way tool post
- Follow rest
- Large capacity steady rest
- Fully integrated coolant system, full length splash guard and coolant return
- Large easy to use foot brake
- Centrally located controls with jog button, threading dial, mounting pads and levelers, li
3-1/8 in bore spindle is supported by two tapered and one ball bearings
Chrome molybdenum headstock gears are hardened, ground and shaved
Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
T-slotted compound slide featuring four way tool post
One piece cast iron base absorbs vibration allowing heavier cuts
High quality ANSI class 50 wear resistant cast iron bed ways are hardened and ground
Removable gap allows large diameter work
Five position automatic carriage stop increases productivity
Attractive chrome levers, dials and knobs complete this impressive package
Meehanite® castings
10 in 3-jaw scroll chuck with top reversing jaws
12 in 4-jaw independent chuck
12 in face plate
Four way tool post
Follow rest
Large capacity steady rest
Fully integrated coolant system, full length splash guard and coolant return
Large easy to use foot brake
Centrally located controls with jog button, threading dial, mounting pads and levelers, live center, tolerance test certificate, tool box and adjusting tools