Guardian AquaGuard™ G1562HTR Portable Eyewash/Drench Hose Unit With Heated Orange Insulation Jacket, 15 gal Capacity, Stainless Steel Flag Handle Operation, ANSI Z358.1-2014

05805786 MFG #: G1562HTR
$0.00 / Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
  • Capacity: 15
  • Color: Hi-Viz Orange
  • Height: 40-1/2
  • Operation Type: Stainless Steel Flag Handle
  • Weight Empty: 41.5
  • Weight Full: 124.8
  • Specifications Met: ANSI Z358.1-2014
Guardian AquaGuard™ Portable Eyewash/Drench Hose Unit, 15 gal, Hi-Viz Orange, 40-1/2 in Height, Stainless Steel Flag Handle Operation, 41.5 lb Weight Empty, 124.8 lb Weight Full, Specifications Met: ANSI Z358.1-2014
QTY
  • 15 gal stainless ste
  • Tank has built-in ca
  • Highly visible orang
  • Silicone drum heater
  • Water temperature in
  • Total amp draw is 3.
  • Ground fault plug co
  • Two GS-Plus™ spray h
  • 1/2 in IPS chrome-pl
  • Pressure regulator c
  • Auxiliary hand-held
  • Unit has single GS-P
  • ANSI compliant ident
  • Quality assurance: u
15 gal stainless steel pressurized tank with 10 gal usable capacity
Tank has built-in carrying handles, schrader air intake valve, pressure gauge and pressure relief valve
Highly visible orange diener nylon insulation jacket is waterproof and mildew resistant
Silicone drum heater is attached to the tank with a spring latch
Water temperature inside of the tank is regulated by an onboard thermostat set to 65 deg F
Total amp draw is 3.33 A and delivers 400 W of power, which allows the unit to operate to temperatures as low as -20 deg F
Ground fault plug comes standard with a 15 A ground fault circuit interrupter (GFCI) with manual reset connected to a 9 ft L cord
Two GS-Plus™ spray heads, each head has a flip-top dust cover, internal flow control and filter
1/2 in IPS chrome-plated brass 3-way self-draining stay open ball valve with stainless steel flag handle
Pressure regulator controls eyewash flow to 0.65 gpm for 15 min
Auxiliary hand-held drench hose for rinsing eyes, face or body
Unit has single GS-Plus™ spray-type outlet head, self-closing valve with squeeze handle, and 6 ft reinforced PVC hose
ANSI compliant identification sign permanently affixed to insulated jacket
Quality assurance: unit is fully assembled, pressurized and water tested at the factory