TPI P3P51100CA1 5100 3-Phase Suspended Fan Forced Unit Heater, 341300 Btu/hr, 480 VAC, 120.4 A, 100 kW

07000302 MFG #: P3P51100CA1
  • Brand: TPI
  • Type: 3-Phase Fan Forced Suspended, 3-Phase Suspended
  • Series: 5100
  • Capacity: 341300
  • Voltage Rating: 480
  • Amperage Rating: 120.4
  • Power Rating: 100
  • Flow Rate: 5000
  • Speed: 1100
  • Temperature Rating: 68
  • Mounting Type: Panel, Surface
  • Mounting Height: 22 ft Horizontal, 40 ft Vertical, 22 ft Horizontal/40 ft Vertical
  • Material: Steel
  • Color: Gray
  • Finish: Powder Coated
  • Dimensions: 39-1/2 in H x 37-5/8 in W x 18-1/2 in D
TPI Fan Forced Unit Heater, 3-Phase Suspended, Series: 5100, 341300 Btu/hr, 480 VAC, 120.4 A, 100 kW, 5000 cfm, 1100 rpm, Surface Mount, 22 ft Horizontal/40 ft Vertical Mounting Height, Steel, Gray, Powder Coated, 39-1/2 in H x 37-5/8 in W x 18-1/2 in D
  • Heavy gauge steel cabinet with powder coated finish and control compartment housing a mast
  • The control compartment allows for access through a hinged and latched door, simplifying w
  • The heating element is a copper clad steel sheath element with continuously brazed steel f
  • All units come equipped with manual reset type limit controls to de-energize the heater sh
  • Single speed 1-phase permanently lubricated, thermally protected motors with ball bearings
  • The fan override purges the unit of residual heat at shutdown
  • Summer fan switch to operate the fan only and a heat stratification thermostat for high ba
  • 60 kW and 70 kW are three heater stage and 80 kW, 90 kW and 100 kW are four heater stage
  • 1/3 hp, 24 V control voltage
Heavy gauge steel cabinet with powder coated finish and control compartment housing a master terminal board
The control compartment allows for access through a hinged and latched door, simplifying wiring, installation and maintenance
The heating element is a copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
All units come equipped with manual reset type limit controls to de-energize the heater should an over temperature situation occur
Single speed 1-phase permanently lubricated, thermally protected motors with ball bearings
The fan override purges the unit of residual heat at shutdown
Summer fan switch to operate the fan only and a heat stratification thermostat for high bay areas
60 kW and 70 kW are three heater stage and 80 kW, 90 kW and 100 kW are four heater stage
1/3 hp, 24 V control voltage